Hi all
im new to all this so ill tell you what i have im building a 1986 camaro with a 350 tpi i have already bored it .30 over and going with flat top pistons
and the stock crank and rods its a 2 bolt main roller block .

now what i need help with is what cam to go with that i can use the stock tpi set up?
i know it runs out of breath around 5k and i would like to stay with a roller can any help is appreciated

 

? anyone

 

The Comp "502" grind 08-502-8 is known to work pretty well on an otherwise stock TPI 350.

Stick with cams that are specifically designed with TPI in mind, as TPI puts some unique constraints on the cam. Cams that might work GREAT with some other induction systems, can often fall far short of optimum with TPI.

 

That's the same setup my motor is. I used Comp Cams xr264hr cam and lifters. The grind on it is 08-501-8. It's what their tech guy recommended. I am no expert on cams though, so just some info for you to consider.