rebuild 350 to a 383

Reply Subscribe

Thread Tools

Search this Thread

Jul 3, 2011 | 07:09 PM

Jaws031

Thread Starter

Junior Member

Joined: Mar 2010

Posts: 93

Likes: 0

From: byhalia Ms

Car: 88 camaro

Engine: 350

Transmission: 700r4

rebuild 350 to a 383

i going to rebuild my 350 to a 383 next year. what all parts do i need to get it done.

Jul 3, 2011 | 07:15 PM

Guest

Guest

Posts: n/a

Re: rebuild 350 to a 383

It's mostly just the stroker crank, matching pistons, and a bit of clearance grinding to the block and maybe the tops of the rod bolts.
Other than that, it's about the same as rebuilding any other 350.

Jul 3, 2011 | 08:12 PM

Ozz1967

Supreme Member

iTrader: (4)

Joined: Dec 2005

Posts: 4,795

Likes: 15

From: St. Cloud, MN

Car: 1984 Trans Am

Engine: LS1383 in work

Transmission: Magnum F - to be installed

Axle/Gears: Zexel Torsen 3.73, 28-spline mosers

Re: rebuild 350 to a 383

Quote:

Originally Posted by Jaws031

i going to rebuild my 350 to a 383 next year. what all parts do i need to get it done.

3.75 Stroke, bore the cylinders .030 is really all that "needs" to be done along with clearancing the crank so that it can accept it. You can buy rotating assembly kits already set up for it so all you need to do is bore the cylinders.

All the 350 parts will bolt up to the 383 otherwise. Now, if you want performance, it's all about how much $$ you want to spend.