timing/car vibrating/no power
#1
timing/car vibrating/no power
all stock 1989 350 iroc-z with mild cam upgrade
just replaced maf sensor, tps sensor, and distributer
i found TDC and when trying to time the car, i set it at 8* btdc with est unplugged with aldl jumped, it vibrates and has loss of power when driving down the block.
what could be causing this?
just replaced maf sensor, tps sensor, and distributer
i found TDC and when trying to time the car, i set it at 8* btdc with est unplugged with aldl jumped, it vibrates and has loss of power when driving down the block.
what could be causing this?
#2
Senior Member
iTrader: (1)
Join Date: Sep 2006
Location: Canada
Posts: 962
Likes: 0
Received 13 Likes
on
10 Posts
Car: 1979 Malibu
Engine: Blown LSx
Transmission: T56 Magnum
Axle/Gears: 9"/wavetrac/35's/3.70
Re: timing/car vibrating/no power
Make sure the firing order is correct, 18436572, CW rotation. Factory timing should also be set at 6* BTDC. Is the car throwing any codes?
#3
Junior Member
Join Date: Nov 2010
Posts: 21
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1985 Trans Am
Engine: 305 TPI 5.0L
Re: timing/car vibrating/no power
all stock 1989 350 iroc-z with mild cam upgrade
just replaced maf sensor, tps sensor, and distributer
i found TDC and when trying to time the car, i set it at 8* btdc with est unplugged with aldl jumped, it vibrates and has loss of power when driving down the block.
what could be causing this?
just replaced maf sensor, tps sensor, and distributer
i found TDC and when trying to time the car, i set it at 8* btdc with est unplugged with aldl jumped, it vibrates and has loss of power when driving down the block.
what could be causing this?
Thread
Thread Starter
Forum
Replies
Last Post