Steering column swap
Thread Starter
Junior Member
Joined: Sep 2009
Posts: 19
Likes: 0
From: Minnesota
Car: 91 Chevy Camaro RS
Engine: 305 TBI
Transmission: 700R4
Steering column swap
I was wondering if any one knows what vehicles steering wheel columns can be used in a 91 camaro. I want to go to a junk yard and pull one but not sure which ones will fit. Any help would be great.
Joined: Dec 2004
Posts: 16,771
Likes: 1,001
From: Mile High Country !!!
Car: 1967 Camaro, 91 z28
Engine: Lb9
Transmission: M20
Axle/Gears: J65 pbr on stock posi 10bolt
Re: Steering column swap
You will be better off repairing your column, the columns are specific for the thirdgens and some 88 and 89-92 use vats witch you will need to swap over your lock cylinder or bypass the vats.
Thread Starter
Junior Member
Joined: Sep 2009
Posts: 19
Likes: 0
From: Minnesota
Car: 91 Chevy Camaro RS
Engine: 305 TBI
Transmission: 700R4
Re: Steering column swap
I do have a new lock cylinder and my problem is the bearings on the upper part of the shaft in front of the pivot. I can not find these bearings any where they completely fell apart.
Senior Member
Joined: Apr 2007
Posts: 668
Likes: 0
From: wallingford,ct
Car: 91 formula ws6
Engine: 355 tpi OBDII
Transmission: 4l60E
Axle/Gears: 2.73 with 4th gen brakes
Re: Steering column swap
Also, they come right apart. Just put the ***** back into the plastic retainer, coat it with grease to hold the ***** in place and just put it back together.
Thread
Thread Starter
Forum
Replies
Last Post
evilstuie
Exhaust
24
Feb 28, 2016 03:33 PM
