91 Z28 wouldn't start

Reply Subscribe

Thread Tools

Search this Thread

Jun 18, 2013 | 02:14 PM

Tx 91Z28

Thread Starter

Junior Member

Joined: Jul 2010

Posts: 25

Likes: 0

Car: 91/Z28/69SSCamaro/72Cheyenne

Engine: 350/350/350

Transmission: 700r4/400/350

Axle/Gears: 3.23/4.56/4.11

91 Z28 wouldn't start

I have looked high and low for a fix for these cars not starting and found this on my car after I replaced the starter,wrapped the starter.replaced the igniton switch,bypassed the vats with the resistor and Newrockies box,double checked the nuetral safety switch. etc.etc.

I found a clicking noise coming from my left kick panel under dash & started chasing wires and found A RELAY. Took off the kick panel & found a Anti Theft Starter Relay part # 14093107 AC DELCO an $ 18.00 part and replaced it & now car runs perfect. Starts each time.

I'm not saying this is your problem.

SEE THREAD LINKS BELOW

Last edited by Tx 91Z28; Jun 19, 2013 at 02:02 PM.

Jun 18, 2013 | 06:49 PM

vetteoz

Supreme Member

iTrader: (13)

Joined: Apr 2005

Posts: 7,736

Likes: 14

From: Not in Kansas anymore

Car: 82 Z28

Engine: 383 SP EFI/ 4150 TB

Transmission: T400

Axle/Gears: QP 9" 3.73

Re: 91 Z28 won't start "FIX"

Quote:

Originally Posted by Tx 91Z28

I have looked high and low for a fix for these cars not starting
I found a clicking noise coming from my left kick panel under dash & started chasing wires and found A RELAY.

The starter enable relay is well documented on here as the 1st thing to check with a no - crank problem ; especially on VATS equipped cars

https://www.thirdgen.org/forums/tpi/...ay-bypass.html
https://www.thirdgen.org/forums/elec...mp-bypass.html
https://www.thirdgen.org/forums/post...56-post14.html
https://www.thirdgen.org/forums/post...303-post6.html