Help with removing and IDing some Emissions stuff.
Thread Starter
Supreme Member


Joined: Jan 2000
Posts: 1,123
Likes: 0
From: jeff NY usa
Car: 86 Z28
Engine: 350
Transmission: W/C T-5
Axle/Gears: 9 BOLT 3.45 POSI
Help with removing and IDing some Emissions stuff.
Hi, I removed most of the Emissions stuff from my Car after switching over to Non Comp controlled carb and dist.
What can I do about the charcoal canister? there is also something in front of it that has vacuum and a bracket I think it is for Cruise control which I don't use or need either. Then in the lower fender area there is a Round thing with vacuum,
Can all of these be removed?
What are they for?
What do I do with the vac hoses?
Thanks
What can I do about the charcoal canister? there is also something in front of it that has vacuum and a bracket I think it is for Cruise control which I don't use or need either. Then in the lower fender area there is a Round thing with vacuum,
Can all of these be removed?
What are they for?
What do I do with the vac hoses?
Thanks
Joined: Jun 2000
Posts: 5,364
Likes: 51
From: Enschede, Netherlands
Car: 82 TA 87 IZ L98 88 IZ LB9 88 IZ L98
Engine: 5.7TBI 5,7TPI 5.0TPI, 5,7TPI
Transmission: T5, 700R4, T5, 700R4
Axle/Gears: 3.08, 3.27, 3.45, 3.27
Re: Help with removing and IDing some Emissions stuff.
the vac servo is for cruise yes. You need to cap off the line where it's Ted from the vac line to the hvac controls.
the round thing is the vac resrvoir. Kind of handy to keep
without the charcoal canister it's gonna reek of fuel.
the round thing is the vac resrvoir. Kind of handy to keep
without the charcoal canister it's gonna reek of fuel.
Thread Starter
Supreme Member


Joined: Jan 2000
Posts: 1,123
Likes: 0
From: jeff NY usa
Car: 86 Z28
Engine: 350
Transmission: W/C T-5
Axle/Gears: 9 BOLT 3.45 POSI
Re: Help with removing and IDing some Emissions stuff.
SO, The box next to the radiator that has mounting bracket and used to have a cable running to it is just for the cruise control? Is that the only one you recommend removing?
Joined: Jun 2000
Posts: 5,364
Likes: 51
From: Enschede, Netherlands
Car: 82 TA 87 IZ L98 88 IZ LB9 88 IZ L98
Engine: 5.7TBI 5,7TPI 5.0TPI, 5,7TPI
Transmission: T5, 700R4, T5, 700R4
Axle/Gears: 3.08, 3.27, 3.45, 3.27
Re: Help with removing and IDing some Emissions stuff.
Yes, this is the cruise servo
Thread Starter
Supreme Member


Joined: Jan 2000
Posts: 1,123
Likes: 0
From: jeff NY usa
Car: 86 Z28
Engine: 350
Transmission: W/C T-5
Axle/Gears: 9 BOLT 3.45 POSI
Re: Help with removing and IDing some Emissions stuff.
SO I can remove that with out any issues then? I don't use it, I have owned the car for 20 YEars and I don't think it has ever worked.
Joined: Jun 2000
Posts: 5,364
Likes: 51
From: Enschede, Netherlands
Car: 82 TA 87 IZ L98 88 IZ LB9 88 IZ L98
Engine: 5.7TBI 5,7TPI 5.0TPI, 5,7TPI
Transmission: T5, 700R4, T5, 700R4
Axle/Gears: 3.08, 3.27, 3.45, 3.27
Re: Help with removing and IDing some Emissions stuff.
yup
Thread
Thread Starter
Forum
Replies
Last Post
Hotrodboba400
Firebirds for Sale
3
Dec 10, 2019 07:07 PM
Hotrodboba400
Firebirds for Sale
0
Sep 2, 2015 07:28 PM




