On the attached image it's the one with the blue arrow/circle.

There are 3 lines coming off the canister here. One goes to the TB, one below that goes to a cylinder connector which branches out to other vacuum lines.

The last one here just seems to be venting, I can't imagine this is correct?

 

I have attached a 2nd picture. This is another i'm not sure where she needs to go. I have of those types hooked to the heater control valve and the egr valve.

It will reach all the way to the TB.

Any ideas?

 

This goes to the fuel tank via hard lines I think?? not 100% sure but I think so.

That looks to be the second vacuum tube from the egr solenoid that goes to the throttle body I believe.

 

Update on this, I still can't find where the small line goes. I put a picture up of the area where 2 lines come up right next to each other. They are the more plastic feel lines. One is shorter and goes to the EGR valve and the other one is longer and reaches the TB. I don't see another spot to put it.

Any more thoughts or am I just missing this thing completely?

The 2 lines come up right by the MAP sensor and Distrib cap area.

 

It should go to the TB.

The 2 hard plastic vacuum lines are from the EGR solenoid. Shorter goes to the EGR, longer to the TB.

 

What is the exact spot it plugs in thtanner? I must be blind.