EGR.. to clean or to purchase new??
EGR.. to clean or to purchase new??
its not giving me a code. however im getting 12.5 MPG at best.
changed plugs (rapid fire), wires are in good shape, replaced O2, synthetic fluids, 32psi front tires, 30 rear, very gentle driving might get me 13 - 13.5 MPG.
i wanna replace the EGR since i don't know if it has ever been replaced. But could i save myself $45 and just take it off and clean it?
changed plugs (rapid fire), wires are in good shape, replaced O2, synthetic fluids, 32psi front tires, 30 rear, very gentle driving might get me 13 - 13.5 MPG.
i wanna replace the EGR since i don't know if it has ever been replaced. But could i save myself $45 and just take it off and clean it?
Since a new quality (from the dealer) EGR is 80 dollars or so, that'd be the last thing I'd change.
A thermostat that's stuck open (overcooling) will reduce economy, as will a clogged fuel filter.
A thermostat that's stuck open (overcooling) will reduce economy, as will a clogged fuel filter.
Senior Member

Joined: Nov 2000
Posts: 762
Likes: 2
From: Riverside, CA
Car: 1987 Camaro IROC-Z
Engine: 305TPI
Transmission: 700R4
i would say 'no' on getting the EGR from AutoZone..
i had all kinds of problems trying to find one that came with the correctly designed vacuum port on the top..
get the one at GM, save yourself the trouble (taht's what I did)..
my guess is that you're running rich.. try changing your Oxygen Sensor before anything else
my $0.02
i had all kinds of problems trying to find one that came with the correctly designed vacuum port on the top..
get the one at GM, save yourself the trouble (taht's what I did)..
my guess is that you're running rich.. try changing your Oxygen Sensor before anything else
my $0.02
O2 sensor has been changed a month or two ago.
and as far as the EGR goes, the guy at autozone said all i had to do was give him the # on the EGR and he could give me the correct one.
and as far as the EGR goes, the guy at autozone said all i had to do was give him the # on the EGR and he could give me the correct one.
Senior Member

Joined: Nov 2000
Posts: 762
Likes: 2
From: Riverside, CA
Car: 1987 Camaro IROC-Z
Engine: 305TPI
Transmission: 700R4
trust me, i'm telling you from experience man..
when it comes it will have an angled vacuum port which will require you not only to change the vacuum fitting on your vacuum line but also screw around trying to make sure it will work..
i also got one from Kragen, twice..
none of them were half decent so i said screw it and got the GM one
when it comes it will have an angled vacuum port which will require you not only to change the vacuum fitting on your vacuum line but also screw around trying to make sure it will work..
i also got one from Kragen, twice..
none of them were half decent so i said screw it and got the GM one
Trending Topics
Thread
Thread Starter
Forum
Replies
Last Post




