HI,
I am trying to find out what is the correct battery hold down bracket retainer for the battery. My battery is sitting on the tray only. I don't see any holes, nor a way to use an universal kit.


Any suggestions appreciated.

 

It looks like this:

http://www.rockauto.com/en/catalog/c...le.com+URL+%2F

It uses a bolt with a captive washer.

 

My factory battery had a little rubber hold down that went on the back side. This is it

http://shop.advanceautoparts.com/p/d...DdIaAo508P8HAQ

After I changed batteries I ended up making a new one. All of this was because the previous owner changed the cables to a new style

 

so the pictures attached is the new one you make right?

 

Yes the pictures is the new one I made. The link is the factory piece.

 

perfect! Thank you both.

 

 

I believe the bolt hole is a standard M8 maybe M8 x 1.25.

I just welded a bolt into a piece of square stock and drilled a hole in the side for the hold down hook.

 

got it.very creative