a loud bang in first followed by neutral
Thread Starter
Junior Member
Joined: Apr 2018
Posts: 59
Likes: 1
a loud bang in first followed by neutral
was taking off fast at a light out of first the car was fully in gear and i had a rolling start then i came on to it and a loud BANG then the car didnt move while the shifter was still in 1st, i took it out in neutral and put it back to first and it worked fine. then today(2 weeks later) did the same thing. is my 1st gear wearing? what causes this.
Senior Member
iTrader: (14)
Joined: Oct 2006
Posts: 823
Likes: 1
From: erlangen, Germany
Car: 1991 Z28 1LE
Engine: LS1
Transmission: T56
Axle/Gears: 3.42
Re: a loud bang in first followed by neutral
Probably the teeth in the block ring are worn or not fully engaging or the fork pads are worn and not letting the block ring fully seat.
Also, you might get better responses in the transmission forum
Ken
Edit*
Also you may want to add your vehicle information so we know what application we're helping you troubleshoot.
Also, you might get better responses in the transmission forum
Ken
Edit*
Also you may want to add your vehicle information so we know what application we're helping you troubleshoot.
Last edited by mcgarnicle; Jun 8, 2018 at 04:51 AM. Reason: advice
Senior Member
Joined: Mar 2017
Posts: 902
Likes: 139
From: waterloo ontario
Car: 1986 trans am
Engine: 305/350
Transmission: 5 speed
Axle/Gears: 3.27
Re: a loud bang in first followed by neutral
it seems like you are having difficulty finding the right place to post questions
Thread Starter
Junior Member
Joined: Apr 2018
Posts: 59
Likes: 1
Yep , God forbid he'd have posted it in the "Transmission/drivetrain" section , that would have made too much sense . 
Thread
Thread Starter
Forum
Replies
Last Post
torqueaddict
Transmissions and Drivetrain
15
Jul 15, 2012 05:27 PM