MAF sensor replaced now relays bad?
Thread Starter
Junior Member
Joined: Sep 2018
Posts: 2
Likes: 0
MAF sensor replaced now relays bad?
i had the MAF sensor go bad and leaned it out badly. Threw a code 33 and heated the exhaust manifolds to cherry hot. Started the valve cover gaskets in fire!
replade gaskets, thermostat, and MAF sensor. Ran great for a week and started throwing a code 36! also water pump started leaking behind the pulley. Seal failed. Installed a new pump today and still throwing a 36 code. Cannot seem to locate the relays at any parts stores.
Any idea where i might get them??
replade gaskets, thermostat, and MAF sensor. Ran great for a week and started throwing a code 36! also water pump started leaking behind the pulley. Seal failed. Installed a new pump today and still throwing a 36 code. Cannot seem to locate the relays at any parts stores.
Any idea where i might get them??
Joined: Sep 1999
Posts: 4,353
Likes: 308
From: NJ
Car: 92 Firebird
Engine: 4.8 LR4
Transmission: T56
Axle/Gears: 3.45 9 Bolt
Re: MAF sensor replaced now relays bad?
I dont know whether you need the flat relay or the round one but they are both available on Rock Auto, the AC one is flat and the MAF shows round
https://www.rockauto.com/en/catalog/...sor+relay,3584
https://www.rockauto.com/en/catalog/...sor+relay,3584
Thread Starter
Junior Member
Joined: Sep 2018
Posts: 2
Likes: 0
Re: MAF sensor replaced now relays bad?
I need the flat ones but Rick auto only shows one. I want both and they have different numbers. Other posts say they need to be different so where else can I look?
Thread
Thread Starter
Forum
Replies
Last Post
OUR_ZED
TPI
3
Jul 12, 2017 07:09 PM
85CheroCamaro
Tech / General Engine
1
Oct 6, 2009 08:36 PM
