how much power will I gain with this cam?
Thread Starter
Member
Joined: Nov 2001
Posts: 409
Likes: 0
From: Birmingham Mi, USA
how much power will I gain with this cam?
hey
engine is a 350, stock 75cc mexico smoggers, shorty headers, performer intake, Edelbrock 600carb.
The cam in there now is 204&214@.050,with .422&.444 lift, total duration is 262. I dont know who makes the cam,I think it may be Crane under another name. I got it from a local engine shop.
I was thinking of swapping in a comp cams x/e 262 or 268.
engine is a 350, stock 75cc mexico smoggers, shorty headers, performer intake, Edelbrock 600carb.
The cam in there now is 204&214@.050,with .422&.444 lift, total duration is 262. I dont know who makes the cam,I think it may be Crane under another name. I got it from a local engine shop.
I was thinking of swapping in a comp cams x/e 262 or 268.
Member
Joined: Apr 2001
Posts: 224
Likes: 0
From: Missisauga ON
Ran your set-up on the desk-top dyno.
Present cam=270hp.@4500 and 358lbs/ft@3500
xe-262=294hp.@5000 and 356lbs/ft@3500
xe-268=300hp.@5000 and 340lbs/ft@4000
You should see a .15-.3 improvement in e.t.
If it was my car I would probably save for a set of heads and do
both at the same time but thats your call,hope this helps
Present cam=270hp.@4500 and 358lbs/ft@3500
xe-262=294hp.@5000 and 356lbs/ft@3500
xe-268=300hp.@5000 and 340lbs/ft@4000
You should see a .15-.3 improvement in e.t.
If it was my car I would probably save for a set of heads and do
both at the same time but thats your call,hope this helps
Thread
Thread Starter
Forum
Replies
Last Post
ambainb
Camaros for Sale
11
Apr 25, 2016 09:21 PM