Here is a good question for you injected guru's Can you get injectors bench teste???? I know you can test the ohms but can this be done?????

Thanks Keiran.

 

Yes, they have a bench test for injectors. I've seen pictures and articles about it. I think AcceldZ has had it done. It checks how each one fires, and makes sure they're not clogged, and that they have a constant, uniform spray pattern.

 

Cool. Thanks. A local jobber here says he does it so. I have a set of 305 injectors from a 89 tpi. What do you think they are worth??? I guy has offered me $150...isn't that a bit cheap??? I know they are only 19lbs, but...

 

19lb'ers, $150, sell em'

You can get 22lb'ers off of ebay for like $50US.

Sell them while you can.
Now I wish I would have parted out my 305tpi, i might have got more money for it.

 

Great... SOld then. Actually I am really getting the posi carrier I need for my car for trade. The guy that I get the posi from is selling them to a friend. All I want is my posi. Need the traction, this year a Cayuga Drag strip only got 1 run but I did nothing but spin 1st through 2nd. Posi should help. Thanks for you help. See...we can get along. LOL.

Thanks Keiran.

 

I have an article on how to make ani njector bench tester. I'll mail it to you if you're really interested.

I had 2 sets of 19's and had them cleaned and flowtested by cuisinperformance in the states for pretty cheap, like $100? He picked out the 8 that flowed the closest..were within 1.5%.

I guess I could scan that article too if more are curious...

 

6speedIROC,

I'm very interested in the article you have . Would you mind emailing it to me please.

 

Let me see how long it is..may take a while to scan and I know the quality it bad.

I was actually thinking hard copy via snail mail. I'll know over the weekend for sure.

Check this out.. http://www.cruzinperformance.com/injsteps.html

 

whoa, awsome link. Thx much 6speedIROC. Always been a carb kid myself but seein as how things move on and become more and more expensive(GAS!), I'm well aware I'll have to make the move to FI sooner than later for street use.

 

Excellent link! Thanks!

 

Ok guys, found the article here. It's like 20 pages and I don't have a scanner at home. It's from Performance Engineering Magazine in 1992, entitled An Electronic Fuel Injector Test Bench.

How about I snail mail it to someone who will scan it and make it available to anyone else who wants it (e-mailed)

I'm also going to look at home for an electronic copy but I think it is long gone...from a few years back.