Lack of Response.....
Thread Starter
Supreme Member
Joined: Sep 2000
Posts: 1,075
Likes: 0
From: Bowmanville,Ontario Canada
Car: 1990 Iroc Z Convertible
Engine: LB9
Transmission: 700R4
Lack of Response.....
Is it just me or is there a little bit of a lack of response for this board.I believe there are alot more Canadian members than the regulars that I've seen here. I realize that this is a relatively new board, but other than myself and a few others I'm not seeing a great deal of new names in here.I hope to see some new responses or posts from Canadian memebers.
Steve
------------------
1990 Iroc convertible,305 tpi,Black with black leather interior,lowered,Taylor 8mm wires,K&N's
Steve
------------------
1990 Iroc convertible,305 tpi,Black with black leather interior,lowered,Taylor 8mm wires,K&N's
TGO Supporter

Joined: Nov 2000
Posts: 1,466
Likes: 0
From: Brampton On
Car: Chrysler 300c
Engine: 5.7L Hemi
Transmission: 5spd auto
Axle/Gears: 2.89
i agree i asked for this board because of all the people but at least its better than no board. maybe some advertisement would help a bit
------------------
Moderator of the Southern Ontario board
-------------------------
1987 Trans AM
305 LG4 5.0L
WS6
700R4
142,000km
Black on gold trim
t- tops
K&N
Flowmaster 80 series
Sony X-plod deck
prestige 6 x 9s
2 crunch 10" bandpass
Boss 500w X 2 amp bridged to 2 Ohms
comming soon:
P275 50 R 16 on the back
(if they fit)
-------------------------
KILLS:
*NEW 88 MUSTANG H.O* 98 Mustang GT, 99? Dodge Ram 2500, 95 Acura Integra, 00 Cavalier (6 car lenghts!!!), many many ricers
------------------
Moderator of the Southern Ontario board
-------------------------
1987 Trans AM
305 LG4 5.0L
WS6
700R4
142,000km
Black on gold trim
t- tops
K&N
Flowmaster 80 series
Sony X-plod deck
prestige 6 x 9s
2 crunch 10" bandpass
Boss 500w X 2 amp bridged to 2 Ohms
comming soon:
P275 50 R 16 on the back
(if they fit)
-------------------------
KILLS:
*NEW 88 MUSTANG H.O* 98 Mustang GT, 99? Dodge Ram 2500, 95 Acura Integra, 00 Cavalier (6 car lenghts!!!), many many ricers
I'm thinking the lack of responses may just be because the tech boards are where most people go. This is more for questions about our area... tech is anywhere.
Also... the only reason I found this board was because Paul told me... I never scroll down the main page far enough to see the regional clubs.
[This message has been edited by sleeper (edited June 03, 2001).]
Also... the only reason I found this board was because Paul told me... I never scroll down the main page far enough to see the regional clubs.
[This message has been edited by sleeper (edited June 03, 2001).]
Hey Mo!(Steve) This is great! As I told you on the phone, I'm in for Mosport. My neighbour was commenting that he would love to go around in an F1 car, I replied that I would just be happy to go around in my car!
[This message has been edited by oldbird (edited June 03, 2001).]
[This message has been edited by oldbird (edited June 03, 2001).]
hey, i am fairly new to this board... I just noticed this forum myself .. I live in London and just wanted to say hey...
Hello fellow Canadians
Mike
------------------
Mike
88 Iroc-Z 350 tpi, Hedmann Headers, 3" Cat Back, MSD Ignition, K&N, AirFoil
Hello fellow Canadians
Mike
------------------
Mike
88 Iroc-Z 350 tpi, Hedmann Headers, 3" Cat Back, MSD Ignition, K&N, AirFoil
Trending Topics
Just noticed this board as I scrolled down the main page. Anyway, just saying hi for now. I have been on the Shannonville track many years ago with my ride but before I do that again I need to upgrade the brakes to the 1LE package. I completely toasted the pads and warped the rotors. Was a fun day though!!
John
------------------
1984 Z28
L69, CC Quadrajet
K&N Filter
3.73 Limited Slip
Centerforce DF Clutch
SLP 1 5/8 headers, high flow CAT, SS Exhaust
GM Motorsports Struts
John
------------------
1984 Z28
L69, CC Quadrajet
K&N Filter
3.73 Limited Slip
Centerforce DF Clutch
SLP 1 5/8 headers, high flow CAT, SS Exhaust
GM Motorsports Struts
Junior Member
Joined: May 2001
Posts: 41
Likes: 0
From: Sarnia, Ontario, Canada
Car: '83 Z28
Engine: LT1 (in progress)
Transmission: 700R4
I just found out about this the other day as well. I don't usually scroll down to the Region pages because they were all from the U.S. I think it will catch on.
Member

Joined: Jun 2000
Posts: 322
Likes: 2
From: Sweaburg, ON Canada
Car: '85 IROC
Engine: 305
Transmission: T-5
I probably would not have found this area if one of the guys hadn't mentioned it on the TFbM mailing list. Whenever I come here I just check out the drivetrain and suspension forums and that's it.
------------------
1985 Yellow IROC-Z 5.0 HO, T-5 3.73 Torsen, 4 wheel disks
PFCM pads, GTA wheels, Koni yellows, B&M Ripper, Dynomax
------------------
1985 Yellow IROC-Z 5.0 HO, T-5 3.73 Torsen, 4 wheel disks
PFCM pads, GTA wheels, Koni yellows, B&M Ripper, Dynomax
I usually just read the posts, I also found out through TFbM mailing list like John and had to check it out!!
Mark
------------------
1988 Trans-am GTA, 5.0l, TPI, T-tops, Mac STB, Mac SFC's,
K&N Filtercharger, Vortex Cat Back
Best e.t. 15.48 @ 88.26 MPH
Member of Toronto F-Body Motorsports http://www.tfbm.org
my car page http://www.fortunecity.com/silversto...5/carspage.htm
Mark
------------------
1988 Trans-am GTA, 5.0l, TPI, T-tops, Mac STB, Mac SFC's,
K&N Filtercharger, Vortex Cat Back
Best e.t. 15.48 @ 88.26 MPH
Member of Toronto F-Body Motorsports http://www.tfbm.org
my car page http://www.fortunecity.com/silversto...5/carspage.htm
i never knew about this board until I accidentally scrolled to the bottom of the main page one day.Anybody else from Cambridge out there?There are alot of 3rd gen cars in this town cmon people
[QUOTE]Originally posted by zedder 1 9 9 0:
I believe there are alot more Canadian members than the regulars that I've seen here. I hope to see some new responses or posts from Canadian memebers.
Steve0
I check out your board every now and than, but since I'm on the West coast and this is a Southern Ontario board, so not many other Canadians check it out.
GOOD LUCK though and KEEP THE 3RDGEN ALIVE

I believe there are alot more Canadian members than the regulars that I've seen here. I hope to see some new responses or posts from Canadian memebers.
Steve0
I check out your board every now and than, but since I'm on the West coast and this is a Southern Ontario board, so not many other Canadians check it out.
GOOD LUCK though and KEEP THE 3RDGEN ALIVE

Member

Joined: Jun 2000
Posts: 322
Likes: 2
From: Sweaburg, ON Canada
Car: '85 IROC
Engine: 305
Transmission: T-5
<font face="Verdana, Arial" size="2">Originally posted by bmwelder:
Anybody else from Cambridge out there?There are alot of 3rd gen cars in this town cmon people</font>
Anybody else from Cambridge out there?There are alot of 3rd gen cars in this town cmon people</font>
------------------
1985 Yellow IROC-Z 5.0 HO, T-5 3.73 Torsen, 4 wheel disks
PFCM pads, GTA wheels, Koni yellows, B&M Ripper, Dynomax
I'm just down 24 HWY in Brantford. Cambridge has lots of quick cars 
------------------
Current
86 TA 305 5 speed, hardtop
99 Ducati 750 Super Sport
Former
85 Z28
94 TA

------------------
Current
86 TA 305 5 speed, hardtop
99 Ducati 750 Super Sport
Former
85 Z28
94 TA
Supreme Member
Joined: Apr 2001
Posts: 1,715
Likes: 0
From: Stouffville, Ontario
Car: 83WS6TA
Engine: ZZ4
Transmission: TH350C
Axle/Gears: 3:23
I found this board by accident. I usually just read the same three or four tech boards every day.
There are a lot of local issues I need to know about like: what happens with emisions once my 83 TA hits 20 years old and I want to put a 350 non-emissions crate in it; also, notwithstanding the US exchange rate, why are aftermarket parts three times as much in Canada etc.
So, I hope this board will catch on.
There are a lot of local issues I need to know about like: what happens with emisions once my 83 TA hits 20 years old and I want to put a 350 non-emissions crate in it; also, notwithstanding the US exchange rate, why are aftermarket parts three times as much in Canada etc.
So, I hope this board will catch on.
Thread
Thread Starter
Forum
Replies
Last Post









