of pulsewidth with my injectors. I currently have 19 lb/hr injectors (Bosch 0 280 150 222) in a 383 SBC, with a Procharger, and YES they are too small. I first got the injectors from a 305 TPI and I put setup into a 350. I turned up the pressure so that the injectors would supply enough fuel. That worked for awhile. But not with the 383 SC.

I'm looking for lo-buck 30-36 lb/hr HI-Z injectors. I checked some local junkyards for Ford 2.3 turbo injectors, but they go fast around hear.

Any sugestions except for antie up?

Thanks

 

I dont know what youre looking to spend...

I got a set of SVO 30#'ers for just over 200 bucks. Not bad IMO.

 

I believe jds was selling arm loads of SVO injectors that were matched and dyno ran a few times for about that, $200ish

 

I tried JD's performance and all he had were 24 lb/hr. Bumping up the pressure to 60 PSI will gives about 30 lb/hr.

 

TRY EBAY.COM $150-$250 a set most days

 

Accel 30# $249
Accel 36# $389
At Summit.

~M~