Cam choice
Thread Starter
Junior Member
Joined: Apr 2002
Posts: 74
Likes: 0
From: Jefferson, GA
Cam choice
OK my car stock L98 at the moment and I'm building a mild 355 for use with the stock LTR intake.
WIll this cam work:
Federal Mogul E1136
1500-5200 rpm
210/215 @ .050
462/470
110 LC
I was wondering about the LC after doing a search and reading a bunch of posts abot TPI liking 114 or so, but this cam has such a mild duration I'm thinking it might work even with the 110 LC.
I need you input here please.
Thanks,
Ernie
WIll this cam work:
Federal Mogul E1136
1500-5200 rpm
210/215 @ .050
462/470
110 LC
I was wondering about the LC after doing a search and reading a bunch of posts abot TPI liking 114 or so, but this cam has such a mild duration I'm thinking it might work even with the 110 LC.
I need you input here please.
Thanks,
Ernie
Senior Member
Joined: May 2002
Posts: 564
Likes: 0
From: loxahatchee fla
that cams 110 lsa might make the engine fail emission tests(altho its doubtfull with that low durration ) and its sure to idle slightly rougher, heres a cam thats got emission clearance and runs extremely well in TPI sbc engines and idles with just a mild lope, in most 350s its good for about a 35hp boost in hp
http://dab7.cranecams.com/SpecCard/D...1=Display+Card
http://dab7.cranecams.com/SpecCard/D...1=Display+Card
Thread
Thread Starter
Forum
Replies
Last Post
