TPI Tuned Port Injection discussion and questions. LB9 and L98 tech, porting, tuning, and bolt-on aftermarket products.
Sponsored by:
Sponsored by:

Need a little help, pleaseeee

Thread Tools
 
Search this Thread
 
Old Jul 16, 2003 | 07:11 PM
  #1  
afast87's Avatar
Thread Starter
Junior Member
 
Joined: Feb 2002
Posts: 31
Likes: 0
From: IL
Need a little help, pleaseeee

i tore apart mt tpi, and the camera chip i used as a picture log died, i have 3 holes on my manifold, what goes in them.

on the front under the coolant outlet, i think temp switc hfor the ecm
same area just left of that one. i think cold start switch

also just above the cold start injector, no clue at all

car is an 87 GTA. L98

T.I.A.



scott
Reply
Old Jul 28, 2003 | 12:46 AM
  #2  
bowtie4ever1986's Avatar
Junior Member
 
Joined: Jun 2003
Posts: 24
Likes: 0
From: tennessee
ok the hole above the cold start is for the pvc valve the 2 on the front is the cold start and the cooling fan switch. i hope this helps if you need to email youre number and ill look on my car and tell you. good luck . be carefull taking things apart.
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
irocz253
Carburetors
19
Aug 3, 2014 07:01 PM
Sam L.
Engine Swap
5
Mar 25, 2014 12:24 PM
irocz253
Carburetors
7
Nov 26, 2013 09:46 AM
leezickmund
Carburetors
5
Apr 28, 2013 07:57 PM
thegoochking
TPI
45
Sep 13, 2010 04:55 PM




All times are GMT -5. The time now is 12:17 PM.