i am in the middle of my carb to tpi swap on my project rig.
i need an inline fuel pump. i was looking at a holly one that a friend had.
what pressures and flow rates do i need.
it is a 350 chevy small block.
thanks
sully

 

this is the pump i was looking at.
fuel pump

 

You will need more then the 45psi max on that pump. I have my AFPR set at 45psi.

 

how much will i need then?

 

Call Holley and ask if that will work for your application.

I have mine set at 45psi. I just bought a Walbro in-tank pump for $100 off ebay. New.

 

called summit and they told me that this will work great. that it can handle up to 600 horse.
i also asked about the 45 psi and he said that is going to be plenty.
thanks
sully

 

That Holley pump seems more than capable by those numbers, but would it function Ok in use since it would be mounted out side the tank and have to 'suck' fuel up out of the tank? My opinion would be to use an in-tank unit since the fuel would help cool the pump and keep it reasonably quiet (but the insytallation would require a lot more work). Does anyone know from experience how a stand-alone in-line pump works for TPI in the f-body? Just curious.

 

I know they quoted 600 HP, but we are talking fuel pressure to a FI system and not a Carb. 45 PSI still seems on the low side. I would hold off on that pump until you get more info from other sources beside Summit.

 

i kind of thought the same thing and heald off.
i am still looking for a pump. so if anyone has one that they use and like please let me know.
thanks
sully