I am currently building a 355cid motor and was wondering which cam do you guys think I would be best off running. Before I go ahead and ask let me give you some info about what I have.

The heads are cast #376450 with larger ports and valves (1.94/1.625). 60cc chambers with dished pistons so I will have about 10:1 compression. For the intake I have SLP runners and siameased plenum with edlebrock baseplate. I have 3.73's in the back and will match the stall to whatever cam I get. Lastly I have a pair of SLP Tri-Y Headers.

I am looking for something that could maby pull to 5,500 or so and I am not to worried about how streetable it is cause it wont be a daily driver. I need a hydrualic flat tappet cam. So far is sent a form into crane and this is what they told me to use with a 2,500 stall.
http://www.cranecams.com/index.php?s...02&lvl=2&prt=5
also was looking at this one from TPIS
http://www.tpis.com/Catalog_sub_TOC....fts/Valvetrain

Any recomendations or info would be greatly appreaciated, thanks alot