Custom chip for miniram
Thread Starter
Member

Joined: Feb 2000
Posts: 181
Likes: 0
From: Topsfield, Ma USA
Car: 1989 TTA
Engine: 3.8 Turbo
Transmission: 200R4
Axle/Gears: 3.27
Custom chip for miniram
Hey men, not looking for anyone to burn a chip for me for free, not asking how to burn my own!! I am finishing up my build, a 355 miniram, AFR 190, 10.25-1 comp, CC306 engine. Looking for info on your past expierience with a couple curtain prom burners, Ed Wright and Alvin Anderson from PCM for less, theses are the two guys I am interested in using!!
I know get the equip and burn my own, don't have the time right now, besides I would be brand new and want to get a good baseline tune from someone expierienced!! I will have more time in the summer/fall months to get into that and trust me I want to!!!
I currently have a chip I bought from TPIS when I bought the setup, I am sick of having tears run down my face while at redlights so they will probably not get another chance now that I have upgraded the engine internals, if they couldn't get a nairly stock tune right what would they do with this!!! Two of the pistons were wrecked from being gas wached from there tune!!!
***info on your passt expierience would be awesome!!!!
I know get the equip and burn my own, don't have the time right now, besides I would be brand new and want to get a good baseline tune from someone expierienced!! I will have more time in the summer/fall months to get into that and trust me I want to!!!
I currently have a chip I bought from TPIS when I bought the setup, I am sick of having tears run down my face while at redlights so they will probably not get another chance now that I have upgraded the engine internals, if they couldn't get a nairly stock tune right what would they do with this!!! Two of the pistons were wrecked from being gas wached from there tune!!!
***info on your passt expierience would be awesome!!!!
Member
Joined: Sep 2002
Posts: 159
Likes: 0
From: Raleigh, NC
Car: 1991 Corvette
Engine: Bottle fed L98
Transmission: ZF 6 speed
Axle/Gears: D44 IRS/3.92
I've had great luck with Alvin and PCMforless. Never tried anyone else.
He tuned a 383 in a 92 Corvette I used to own. No complaint's, 380 RWHP / 380 RWTQ, 22-25 MPG, ac worked, idled at 750. All in all, pretty painless.
He tuned a 383 in a 92 Corvette I used to own. No complaint's, 380 RWHP / 380 RWTQ, 22-25 MPG, ac worked, idled at 750. All in all, pretty painless.
Member
iTrader: (2)
Joined: Jun 2001
Posts: 432
Likes: 17
From: Dover, De U.S.
Car: 1991 Z-28/ '94 Impala SS
Engine: 355 TPI/ 350 LT-1
Transmission: T-56 in both
Axle/Gears: 3.73 / 4.56
My Alvin tune was junk. Fuel curves all wrong, none of the auto tranny I wanted out of the chip was out (Converted to T-56), idle issues. Had a Comp teacher tune and I will upgrade to the ostrich from Moates. Just my.02
Mike
Mike
Last edited by Realmac4; Feb 19, 2006 at 06:39 PM.
Member
Joined: May 2002
Posts: 203
Likes: 0
From: illinois
Car: 92 camaro
Engine: 383 stroker
Transmission: probuilt 700r4
ive got almost wxact setup as u 383 with afr 195cc heads miniram etc i had ed wright chip and it ran like crap his customer service sucks i am now dealing with alvin and his customer service is top notch he prob wont hit it 1st time around but even his 1st burn was better than eds 3rd try im on 2nd burn with alvin and he getting really close cars running better than it ever has i jus get datalog and sent em to alvin and he tweaks it some more definity go with alvin hes 1/2 the price and his customer service is worth it alone hes a great guy good luck
Junior Member
Joined: Feb 2006
Posts: 14
Likes: 0
From: Central Illinois
Car: 1988 Corvette Coupe
Engine: L98
Transmission: 700R4
Axle/Gears: 2.59:1 IRS
I have a friend that used Alvin for a hot cam tune on his LT1 and had a very bad experience. He didn't rave about the customer service either.
Supreme Member
iTrader: (8)
Joined: Jan 2000
Posts: 3,968
Likes: 1
From: Macedonia ,OH
Car: Formula
Engine: 6.0 LSX
Transmission: 4L60E
Axle/Gears: 9 Bolt 3:27
www.LSRacingChips.com. Awesome Service and an awesome tune. Jamy is the guy to work with.
Trending Topics
Thread
Thread Starter
Forum
Replies
Last Post
ramicio
Engine/Drivetrain/Suspension Wanted
3
Sep 28, 2015 01:18 PM








