TPI Tuned Port Injection discussion and questions. LB9 and L98 tech, porting, tuning, and bolt-on aftermarket products.
Sponsored by:
Sponsored by:

hesitation

Thread Tools
 
Search this Thread
 
Old Jul 14, 2006 | 12:15 PM
  #1  
car86cars's Avatar
Thread Starter
Junior Member
15 Year Member
 
Joined: Jul 2006
Posts: 38
Likes: 1
hesitation

Hesitation
The car hesitate on take off. but codes 44 &33 are coming up. If I cut it off and try to start it up again it want. If I put my foot on the gas it will. code 44 comes up for lean exhaust my injector are ohm out at 16.5 fuel pressure is at 38 psi @ idle 44 psi whith key on tps is set at .54 and timming 6 degree i am lost at this piont

If I hit the gas fast it's stall. if i ground the test port under the dash it will start after about 6 times What do you think it could be? stock 305 tpi

Last edited by car86cars; Jul 14, 2006 at 12:18 PM.
Reply
Old Jul 14, 2006 | 12:35 PM
  #2  
Green89IROC305's Avatar
Member
 
Joined: Jun 2006
Posts: 463
Likes: 9
From: Milford, OH
Car: 91 Z28 - using 87 electricals
Engine: 383 HSR EBL
Transmission: 700R4 - Stage 3 Fixed Pressure
Axle/Gears: GM 3.08 POSI
my techer at school says that hesitation is usually cause by clogged or lazy injectors. but either way it is usually some sort of injector problem(so he says).
Reply
Old Jul 14, 2006 | 02:13 PM
  #3  
car86cars's Avatar
Thread Starter
Junior Member
15 Year Member
 
Joined: Jul 2006
Posts: 38
Likes: 1
when it hesitation the fuel pressure is at about 46 psi does it worse under load in gear don't know what to try next
Reply
Old Jul 14, 2006 | 04:55 PM
  #4  
D's89IROCZ's Avatar
Supreme Member
 
Joined: Jan 2003
Posts: 1,931
Likes: 1
From: Ontario, Canada
Car: 1989 IROC-Z
Engine: 5.7L EFI LTR setup
Transmission: T-5 World Class
lean exhaust ? Makes me think you either have a vaccuum leak , exhaust manifold leak , or a sticky IAC valve.
Reply
Old Jul 14, 2006 | 06:56 PM
  #5  
car86cars's Avatar
Thread Starter
Junior Member
15 Year Member
 
Joined: Jul 2006
Posts: 38
Likes: 1
i did see that the exhaust manifold is leaking buy the o2 sensor will this cause a stalling problem? i clean the iac today
Reply
Old Jul 17, 2006 | 04:01 PM
  #6  
car86cars's Avatar
Thread Starter
Junior Member
15 Year Member
 
Joined: Jul 2006
Posts: 38
Likes: 1
i changed the tps and the iac and nothing going to try o2 sensor next
Reply
Old Jul 18, 2006 | 06:22 PM
  #7  
car86cars's Avatar
Thread Starter
Junior Member
15 Year Member
 
Joined: Jul 2006
Posts: 38
Likes: 1
new o2 new iac new tps new auto zone mass air flow fix exhaust leak what to try next
Reply
Old Aug 2, 2006 | 06:24 PM
  #8  
car86cars's Avatar
Thread Starter
Junior Member
15 Year Member
 
Joined: Jul 2006
Posts: 38
Likes: 1
well took car to the shop and they are saying that the injector might be bad ohm out at 16.5 to 16.8 and alldata say 16.35 max
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Fanatic1074
Tech / General Engine
45
Oct 3, 2022 05:57 AM
db057
TBI
3
Jan 10, 2020 08:55 PM
RedLeader289
Tech / General Engine
10
May 28, 2019 01:47 PM
85 Jimmy
TPI
3
Sep 30, 2015 07:56 AM
RedLeader289
Electronics
6
Sep 23, 2015 06:50 AM




All times are GMT -5. The time now is 09:17 AM.