Need help with FPR!!!
Thread Starter
Member
Joined: Apr 2001
Posts: 153
Likes: 0
From: Cleveland, OH
Car: 91 Z28
Engine: 5.7L
Need help with FPR!!!
I purchased a BBK Adjustable Fuel Pressure Regulator from Summit yesterday. Unfortunately, it didn't come with the torx with the recess in the center to remove the regulator screws. Anyone know where I can get one? Dealership? Make my own? Thanks
------------------
1991 5.7L Z28
14.456 @ 92.78 MPH
Member
iTrader: (1)
Joined: Mar 2001
Posts: 113
Likes: 0
From: St.Pete, FL.
Car: 92 Camaro
Engine: 406 sbc
Transmission: T56
Axle/Gears: 9" ME with 4.56 gears
You can get them from auto zone or advanced auto. Probibly any auto store.
------------------
<A HREF="http://www.geocities.com/camaro1j/myz28.html
84" TARGET=_blank>http://www.geocities.com/camaro1j/myz28.html
84</A> Z28
406
accel supper ram
6000 rpm Hyd roller cam
afr heads
spohn torque arm and crossmember
t-56 trans, [wier racing bellhousing and hydrolic throwout bearing]
9" ME rearend 3.91 Gears
------------------
<A HREF="http://www.geocities.com/camaro1j/myz28.html
84" TARGET=_blank>http://www.geocities.com/camaro1j/myz28.html
84</A> Z28
406
accel supper ram
6000 rpm Hyd roller cam
afr heads
spohn torque arm and crossmember
t-56 trans, [wier racing bellhousing and hydrolic throwout bearing]
9" ME rearend 3.91 Gears
Member
iTrader: (1)
Joined: Mar 2001
Posts: 113
Likes: 0
From: St.Pete, FL.
Car: 92 Camaro
Engine: 406 sbc
Transmission: T56
Axle/Gears: 9" ME with 4.56 gears
I'm just trying to make sure my link to my web page is working
------------------
[URL=http://www.geocities.com/camaro1j/myz28.html
url]
406
accel supper ram
6000 rpm Hyd roller cam
afr heads
spohn torque arm and crossmember
t-56 trans, [wier racing bellhousing and hydrolic throwout bearing]
9" ME rearend 3.91 Gears
------------------
[URL=http://www.geocities.com/camaro1j/myz28.html
url]
406
accel supper ram
6000 rpm Hyd roller cam
afr heads
spohn torque arm and crossmember
t-56 trans, [wier racing bellhousing and hydrolic throwout bearing]
9" ME rearend 3.91 Gears
Member
iTrader: (1)
Joined: Mar 2001
Posts: 113
Likes: 0
From: St.Pete, FL.
Car: 92 Camaro
Engine: 406 sbc
Transmission: T56
Axle/Gears: 9" ME with 4.56 gears
just trying again
------------------
<A HREF="http://www.geocities.com/camaro1j/myz28.html
406" TARGET=_blank>www.geocities.com/camaro1j/myz28.html
406</A>
accel supper ram
6000 rpm Hyd roller cam
afr heads
spohn torque arm and crossmember
t-56 trans, [wier racing bellhousing and hydrolic throwout bearing]
9" ME rearend 3.91 Gears
------------------
<A HREF="http://www.geocities.com/camaro1j/myz28.html
406" TARGET=_blank>www.geocities.com/camaro1j/myz28.html
406</A>
accel supper ram
6000 rpm Hyd roller cam
afr heads
spohn torque arm and crossmember
t-56 trans, [wier racing bellhousing and hydrolic throwout bearing]
9" ME rearend 3.91 Gears
Member
iTrader: (1)
Joined: Mar 2001
Posts: 113
Likes: 0
From: St.Pete, FL.
Car: 92 Camaro
Engine: 406 sbc
Transmission: T56
Axle/Gears: 9" ME with 4.56 gears
and again
------------------
www.geocities.com/camaro1j/myz28.html
406
accel supper ram
6000 rpm Hyd roller cam
afr heads
spohn torque arm and crossmember
t-56 trans, [wier racing bellhousing and hydrolic throwout bearing]
9" ME rearend 3.91 Gears
------------------
www.geocities.com/camaro1j/myz28.html
406
accel supper ram
6000 rpm Hyd roller cam
afr heads
spohn torque arm and crossmember
t-56 trans, [wier racing bellhousing and hydrolic throwout bearing]
9" ME rearend 3.91 Gears
Member
iTrader: (1)
Joined: Mar 2001
Posts: 113
Likes: 0
From: St.Pete, FL.
Car: 92 Camaro
Engine: 406 sbc
Transmission: T56
Axle/Gears: 9" ME with 4.56 gears
and again
------------------
www.geocities.com/camaro1j/myz28.html
406
accel supper ram
6000 rpm Hyd roller cam
afr heads
spohn torque arm and crossmember
t-56 trans, [wier racing bellhousing and hydrolic throwout bearing]
9" ME rearend 3.91 Gears
------------------
www.geocities.com/camaro1j/myz28.html
406
accel supper ram
6000 rpm Hyd roller cam
afr heads
spohn torque arm and crossmember
t-56 trans, [wier racing bellhousing and hydrolic throwout bearing]
9" ME rearend 3.91 Gears
Trending Topics
Junior Member
Joined: Apr 2001
Posts: 37
Likes: 0
From: Montague, NJ
Car: 1985 Chevrolet Camaro IROC
Engine: 305 TPI
Transmission: 700R4
Axle/Gears: 3.42
Just went down to my local hardware store. they had every size available, believe it or not. You are going to need a T10 tamper prood torx bit.
------------------
Rob Kowalski
85 IROC, 305 TPI, JET AFPR - 45 PSI, B&M Megashifter, B&M Shift Kit, 3.42 gears, SLP Airfoil, SLP 1 5/8 headers and cat back system, gutted cat, gutted airbox, MAF screens removed, K&N, more to come!!
------------------
Rob Kowalski
85 IROC, 305 TPI, JET AFPR - 45 PSI, B&M Megashifter, B&M Shift Kit, 3.42 gears, SLP Airfoil, SLP 1 5/8 headers and cat back system, gutted cat, gutted airbox, MAF screens removed, K&N, more to come!!
Thread
Thread Starter
Forum
Replies
Last Post
