would this cam do the job?
Thread Starter
Junior Member
Joined: Apr 2007
Posts: 50
Likes: 0
would this cam do the job?
im converting my car to a tpi setup and im taking an 89 lb9 with the factory i believe 230 horses would this cam give me higher power or would it not be worth it,08-302-8 from comp cams.
this might be quicker. http://compcams.com/Technical/Search...umber=08-302-8
im goign from tbi and my machine shop recommended me this one for the set of 081 heads hes building but i told him tbi and since then found a donor car with tpi.
this might be quicker. http://compcams.com/Technical/Search...umber=08-302-8
im goign from tbi and my machine shop recommended me this one for the set of 081 heads hes building but i told him tbi and since then found a donor car with tpi.
Supreme Member
iTrader: (3)
Joined: May 2005
Posts: 1,942
Likes: 0
From: Southern IL
Car: 88 GTA "Cocaine"
Engine: 350 tpi
Transmission: 700r4
Axle/Gears: 3.27
Re: would this cam do the job?
get one of the zz4 hotcams off ebay for just over 100 bucks
then get a set of z28 springs for around 40 bucks off ebay and take all the shimms out of the heads
get rid of all the spring retainers and get some hi pro cleareance dellio retainers and rock and roll
then get a set of z28 springs for around 40 bucks off ebay and take all the shimms out of the heads
get rid of all the spring retainers and get some hi pro cleareance dellio retainers and rock and roll
Thread
Thread Starter
Forum
Replies
Last Post
