Has anyone ever had the problem of fuel puddling in their plenum. It is not the regulator. There is at least 4-6 oz of raw gas backed up in front of the plenum behind the TB. It filled up the AIC area and even ran out of the front blades of the TB. We took the plenum off and looked for a wet trail but there was none. Where could this possibly be coming from? Any help would be greatly appreciated.

 

With it not being the FPR then it is the CCP system.

RBob.

 

Thanks alot, I will check into that direction.

 

Cracked injector or shot o-ring.
Dry it all up, pressurize the system, and look for new moisture.