TPI Tuned Port Injection discussion and questions. LB9 and L98 tech, porting, tuning, and bolt-on aftermarket products.
Sponsored by:
Sponsored by:

New Relays and now no idle

Thread Tools
 
Search this Thread
 
Old Nov 4, 2011 | 03:56 PM
  #1  
soxbaseball's Avatar
Thread Starter
Junior Member
 
Joined: Jul 2009
Posts: 37
Likes: 0
New Relays and now no idle

87 trans am GTA 5.0 TPI I replaced both MAF relays along with the fuel relay, and now the car will start up and cut right back off. I also replaced the relay plugs in all three along with a new MAF sensor. The car will hold a very rough idle at about 500 rpm if slowly idle it down once its running. Any help would be much appreciated.

Last edited by soxbaseball; Nov 5, 2011 at 05:02 PM.
Reply
Old Nov 5, 2011 | 05:03 PM
  #2  
soxbaseball's Avatar
Thread Starter
Junior Member
 
Joined: Jul 2009
Posts: 37
Likes: 0
Re: New Relays and now no idle

Any suggestions
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
IROCtometal
TPI
2
Sep 20, 2015 11:08 PM
IROCtometal
TPI
3
Sep 9, 2015 10:01 AM
Gunsbee
Electronics
4
Sep 7, 2015 07:10 PM
Glowsock
Tech / General Engine
1
Sep 6, 2015 06:40 AM




All times are GMT -5. The time now is 03:24 AM.