Does anyone have a good picture (or can describe) where the line from the MAP sensor on a SD TPI engine feeds into/from? Also the port just to the right of the MAP sensor as mounted on the plenum, where that would lead to. I realize I might of answer my own question if the line from the MAP goes directly into the plenum next to it . Just want to be sure.

 

I don't have a picture handy but the last one closest to the bulk head is the map the next one to the right is the fuel pressure regulator and the one up hight off by it self is the hvac.

 

Thank you. I did find a picture that kind of shows it:

http://www.hotrodlane.cc/Streetstories/choosingtpi2.htm

Just need to find a vac fitting now for the right side port to move the HVAC line to, currently there is a bolt in it's place.