TPI Tuned Port Injection discussion and questions. LB9 and L98 tech, porting, tuning, and bolt-on aftermarket products.
Sponsored by:
Sponsored by:

TPI tank to filter rubber line length

Thread Tools
 
Search this Thread
 
Old Aug 21, 2013 | 04:30 PM
  #1  
RaverRacerX's Avatar
Thread Starter
Senior Member
 
Joined: Jun 2003
Posts: 828
Likes: 3
From: Rockville, MD
Car: 1989 Camaro RS
Engine: Ellis Juan
Transmission: t-56
TPI tank to filter rubber line length

anyone have any measurements or anything?
Reply
Old Aug 22, 2013 | 10:35 AM
  #2  
Tuned Performance's Avatar
Sponsor
20 Year Member
Community Builder
Community Influencer
Community Favorite
iTrader: (94)
 
Joined: Dec 2004
Posts: 16,754
Likes: 996
From: Mile High Country !!!
Car: 1967 Camaro, 91 z28
Engine: Lb9
Transmission: M20
Axle/Gears: J65 pbr on stock posi 10bolt
Re: TPI tank to filter rubber line length

If your asking the total length from the high pressure crimped on flex line to the filter is 2ft 7", the saginaw female 16mm o-ring flex line is 7 inches from the end of the fitting to the end of the line crimp. If you are needing to replace the flex line you can use a earl's
9894DBJERL to convert to an6 then build a an -6 flex line and double clamp it on the hard line or flare the hardline to an 6 and use a tube nut.
Reply
Old Aug 23, 2013 | 01:00 AM
  #3  
RaverRacerX's Avatar
Thread Starter
Senior Member
 
Joined: Jun 2003
Posts: 828
Likes: 3
From: Rockville, MD
Car: 1989 Camaro RS
Engine: Ellis Juan
Transmission: t-56
Re: TPI tank to filter rubber line length

Originally Posted by Tuned Performance
If your asking the total length from the high pressure crimped on flex line to the filter is 2ft 7", the saginaw female 16mm o-ring flex line is 7 inches from the end of the fitting to the end of the line crimp. If you are needing to replace the flex line you can use a earl's
9894DBJERL to convert to an6 then build a an -6 flex line and double clamp it on the hard line or flare the hardline to an 6 and use a tube nut.
or have inline tube make me one thanks TP
Reply
Old Jul 21, 2015 | 04:45 PM
  #4  
RaverRacerX's Avatar
Thread Starter
Senior Member
 
Joined: Jun 2003
Posts: 828
Likes: 3
From: Rockville, MD
Car: 1989 Camaro RS
Engine: Ellis Juan
Transmission: t-56
Re: TPI tank to filter rubber line length

oops.. didnt mean to bump this.

Last edited by RaverRacerX; Jul 21, 2015 at 05:04 PM.
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
1992rs/ss
NW Indiana and South Chicago Suburb
14
Jan 31, 2025 05:10 PM
1992 Trans Am
History / Originality
27
May 10, 2023 07:19 PM
Infested
Tech / General Engine
3
May 22, 2018 11:56 PM
Leggman1
Brakes
6
Aug 12, 2015 08:39 PM
Sanjay
Engine/Drivetrain/Suspension Parts for Sale
1
Aug 12, 2015 03:41 PM




All times are GMT -5. The time now is 12:34 PM.