TPI Tuned Port Injection discussion and questions. LB9 and L98 tech, porting, tuning, and bolt-on aftermarket products.
Sponsored by:
Sponsored by:

Looking to help someone with their project

Thread Tools
 
Search this Thread
 
Old May 2, 2020 | 10:47 PM
  #1  
Jbuchanan's Avatar
Thread Starter
Senior Member
 
Joined: Mar 2017
Posts: 528
Likes: 46
From: Sweet home Alabama
Car: 1987 GTA
Engine: 5.0
Transmission: Automatic
Looking to help someone with their project

I've learned so much from this site over the last few years and about to be in a place where I have a good running lb9 laying around. My wife bought me a vortec crate 5.7 and I'm going carb and big cam. The lb9 is still in my trans am and probably will be another 2 months until I get all my other parts together for the swap. I will keep all the accessories,oil pan and pulleys. I'm in Alabama and I would like to donate this lb9 to a young person who may be just getting into the hobby or maybe someone who's funding might be limited. If you are looking to make a dime please don't waste my time as I just want to give back to our community. Hit me up if I can help.
Old May 2, 2020 | 11:19 PM
  #2  
QwkTrip's Avatar
COTM Editor
25 Year Member
iTrader: (22)
 
Joined: Mar 2001
Posts: 10,431
Likes: 2,093
Car: '89 Firebird
Engine: 7.0L
Transmission: T56
Re: Looking to help someone with their project

This is the kindest act I ever remember seeing on this forum.
Reply
Old May 3, 2020 | 12:24 AM
  #3  
Jbuchanan's Avatar
Thread Starter
Senior Member
 
Joined: Mar 2017
Posts: 528
Likes: 46
From: Sweet home Alabama
Car: 1987 GTA
Engine: 5.0
Transmission: Automatic
Re: Looking to help someone with their project

Thanks Qwk Trip, I've gotten so much help with my GTA on here that is hard to get on the FB pages and thought this would be the best place to pay it forward.
Reply
Old May 3, 2020 | 09:06 PM
  #4  
Jbuchanan's Avatar
Thread Starter
Senior Member
 
Joined: Mar 2017
Posts: 528
Likes: 46
From: Sweet home Alabama
Car: 1987 GTA
Engine: 5.0
Transmission: Automatic
Re: Looking to help someone with their project

Bump
Reply
Old May 4, 2020 | 06:56 PM
  #5  
Jbuchanan's Avatar
Thread Starter
Senior Member
 
Joined: Mar 2017
Posts: 528
Likes: 46
From: Sweet home Alabama
Car: 1987 GTA
Engine: 5.0
Transmission: Automatic
Re: Looking to help someone with their project

Bump, literally this is a free good running motor tpi and all included. Just need someone to come get it once the vortec goes in around mid June.
Reply
Old May 8, 2020 | 03:47 PM
  #6  
GeneralDisorder's Avatar
Supreme Member
5 Year Member
Liked
iTrader: (1)
 
Joined: Mar 2017
Posts: 4,255
Likes: 427
From: Portland, OR
Car: 86 Imponte Ruiner 450GT, 91 Formula
Engine: 350 Vortec, FIRST TPI, 325 RWHP
Transmission: 700R4 3000 stall.
Axle/Gears: 9 Bolt Torsen 3.70
Re: Looking to help someone with their project

I have exactly the same situation here in Portland, OR. I posted it in the for sale section a while back (for free). I have dyno sheets when it was in my Trans Am:

https://www.thirdgen.org/forums/engi...-lb9-good.html

GD
Reply
Old May 8, 2020 | 09:51 PM
  #7  
Jbuchanan's Avatar
Thread Starter
Senior Member
 
Joined: Mar 2017
Posts: 528
Likes: 46
From: Sweet home Alabama
Car: 1987 GTA
Engine: 5.0
Transmission: Automatic
Re: Looking to help someone with their project

Originally Posted by GeneralDisorder
I have exactly the same situation here in Portland, OR. I posted it in the for sale section a while back (for free). I have dyno sheets when it was in my Trans Am:

https://www.thirdgen.org/forums/engi...-lb9-good.html

GD
I'm going to give it a few weeks on here and if no takers I will post on a FB group I'm a member of local to me. I hate for it to just collect dust but I also understand it's not the most desirable engine.
Reply
Old May 8, 2020 | 10:12 PM
  #8  
dbrochard's Avatar
Member
iTrader: (3)
 
Joined: Nov 2014
Posts: 227
Likes: 6
From: Connecticut
Car: 1991 Camaro RS
Engine: 305 TBI
Transmission: WC T5
Axle/Gears: Torsen 3.73
Re: Looking to help someone with their project

Wow this would've been super helpful to me when I got my car when I was 14 (20 now). I had a generous person like yourself give me a ton of parts for cheap for the same reason; to help a younger guy out. God bless you man, I can tell you as a younger guy in this hobby that I remember all the names of the people that gave me better deals and gave me stuff for free just to help out. Whoever ends up getting this will remember you and will tell stories about you giving them that lb9 for years. Good luck to you my friend, I love to see it.
Reply
Old May 13, 2020 | 10:19 PM
  #9  
Jbuchanan's Avatar
Thread Starter
Senior Member
 
Joined: Mar 2017
Posts: 528
Likes: 46
From: Sweet home Alabama
Car: 1987 GTA
Engine: 5.0
Transmission: Automatic
Re: Looking to help someone with their project

Thank you for the kind words. You nailed with God Bless. I don't usually share my political views or my beliefs on forums but as a Youth Pastor I believe this world needs to know especially in these times is God indeed Blesses, not us but Him. Wished I could have hooked you up when you needed it. Also a good feeling to know that the younger generations dig these cool old cars. Best of luck and keep this hobby going to the generation after you my friend.
Reply
Old May 14, 2020 | 11:48 PM
  #10  
Jbuchanan's Avatar
Thread Starter
Senior Member
 
Joined: Mar 2017
Posts: 528
Likes: 46
From: Sweet home Alabama
Car: 1987 GTA
Engine: 5.0
Transmission: Automatic
Re: Looking to help someone with their project

Update, found a good home for the lb9, young man about an hour away from me.
Reply
Old May 22, 2020 | 01:31 AM
  #11  
Fred SS's Avatar
Senior Member
15 Year Member
iTrader: (4)
 
Joined: Apr 2010
Posts: 514
Likes: 44
From: New Jersey
Car: 87 Monte Carlo SS
Engine: 89 350TPI Transplant
Transmission: 2004r
Axle/Gears: 3.73
Re: Looking to help someone with their project

Man, you did a good thing. God Bless you. I got some decent parts that need a good home. I'm now thinking of giving them away for free. Thanks for the idea.
Reply
Old Jun 9, 2020 | 03:43 PM
  #12  
MontanaIrocGuy's Avatar
Junior Member
 
Joined: Jun 2020
Posts: 24
Likes: 6
From: MT
Car: '86 Iroc Z28
Re: Looking to help someone with their project

Right on that's awesome kick-*** stand up people like yourself are far n few between in this crazy world we live in. Been lurking the boards the last 2 months finally getting another 3rd gen n getting signed up what a great place 🙌
Reply
Old Jun 9, 2020 | 06:13 PM
  #13  
Chris 84TA's Avatar
Member
25 Year Member
 
Joined: Jul 1999
Posts: 363
Likes: 59
From: Poteau, OK, USA - Age: 44 - AKA 84TAVeRT
Car: 1984 Trans Am Convertible
Engine: 355
Transmission: WCT5
Axle/Gears: 3.73
Re: Looking to help someone with their project

if you were still needing someone to come get this, I have driven further

glad you found it a home.

later,
Chris
Reply
Old Jun 9, 2020 | 09:37 PM
  #14  
dmccain's Avatar
Supreme Member
10 Year Member
Liked
Loved
Community Favorite
iTrader: (2)
 
Joined: Mar 2014
Posts: 4,556
Likes: 811
From: South Ms
Car: 89 Firebird
Engine: 355 TBI
Transmission: 700R4
Axle/Gears: 10 Bolt.Posi-3.73s
Re: Looking to help someone with their project

Good man. Good Christian man.
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
firebirdfreak87
Engine Swap
3
May 23, 2016 03:16 PM
firechicken_3
Tech / General Engine
1
Dec 16, 2002 08:45 PM




All times are GMT -5. The time now is 08:06 AM.