What ALL is needed? I did this to my 2k camaro and I know I need....

1. Tranny
2. TC
3. Shifter
4. DS(on my 2k i used the stock unmodified one w/ the 9" tailshaft)
5. Crossmember

Can you use the stock ds? What length tailshaft should I get(9" or 6") Do I use a stock auto crossmember? If so where can I get one? What else do I need guys? Please help.

P.S. if you have any little pointers that help the install go easier please share them.

 

i'm not aure if the crossmember and ds are the same or not, you might get lucky and find out they are. you'll need b&m pn 30299 for the torque arm unless you have an aftermarket one. you'll need a shifter and cable, i'd look at the hurst quarter stick.