700R4, where to find?
Thread Starter
Junior Member
Joined: Jun 2005
Posts: 90
Likes: 0
From: Orange County,CA
Car: 91 Z28, 86 Z28
Engine: 5.7 TPI, 5.0
Transmission: 4L60E/transgo shift kit
700R4, where to find?
My tranny in 91 5.7 just died and now im looking into buying one. So far I have see the raptor junior level 2 that I like and the TCI street fighter. Is there anything else out there that is just as good and a bit cheaper or do I have to shell out big bucks? They both run about $1600. I really need a tranny but dont want to make a wrong choice. Thanks for the help in advance!
Go to http://www.700r4l60e.com/store/custo...&cat=22&page=1 this should be of help? Let me know if I can be of help?
Thread Starter
Junior Member
Joined: Jun 2005
Posts: 90
Likes: 0
From: Orange County,CA
Car: 91 Z28, 86 Z28
Engine: 5.7 TPI, 5.0
Transmission: 4L60E/transgo shift kit
So that's all I would need to get my tranny going again? I took it to a shop and they told me that the 3rd and 4th gear were all messed up and that I needed a new tranny.
Junior Member
Joined: May 2005
Posts: 18
Likes: 0
From: New Jersey
Car: 82 trans am (knight rider)
Engine: 305 Carb
Transmission: 4 speed (want an automatic)
you can get one at mad dog transmissions for 500 bucks they are in florida and i just had them put mine in...if you want there phone number let me know
Moderator
Joined: Feb 2000
Posts: 7,015
Likes: 2
From: Schererville , IN
Car: 91 GTA, 91 Formula, 89 TTA
Engine: all 225+ RWHP
Transmission: all OD
Axle/Gears: Always the good ones
Here are my two picks:
ProbuiltAutomatics, who is on thos board and a very smart transmission man. I've talked to him a few times and more than willing to help..
The second it Jimmy's Transmisisons in Mundelein IL. He has done mine because ProBuilt vouched for him and they actually worked together years ago on designing and testing some parts to make 700's actually last up with real power(he is local to me)
later
Jeremy
ProbuiltAutomatics, who is on thos board and a very smart transmission man. I've talked to him a few times and more than willing to help..
The second it Jimmy's Transmisisons in Mundelein IL. He has done mine because ProBuilt vouched for him and they actually worked together years ago on designing and testing some parts to make 700's actually last up with real power(he is local to me)
later
Jeremy
Thread
Thread Starter
Forum
Replies
Last Post
someone972
Transmissions and Drivetrain
6
Aug 30, 2015 12:52 AM






