just installed new clutch, should i bleed it?
Thread Starter
Junior Member
Joined: Jul 2005
Posts: 86
Likes: 0
From: Alberta
Car: 83 recaro, 82 grandprix, 72 skylark
just installed new clutch, should i bleed it?
ok so i just installed a new clutch and when i removed the hydralic cylinder off of the Bellhousing the rod came out of the cylinder(i think) or just really far out, i havent touched the hyralic clutch system before like opening it up. do i need to bleed it? i took for a drive and it drive awesome
if so where is the bleeder screw i cannot see one on the cylinder attached to the bellhousing.
its on a 2.8L V6
if so where is the bleeder screw i cannot see one on the cylinder attached to the bellhousing.
its on a 2.8L V6
Supreme Member
iTrader: (7)
Joined: Jul 2000
Posts: 2,047
Likes: 2
From: Prince George, BC, Canada
Car: 89 GTA
Engine: 5.7L Supercharged
Transmission: T-56
Axle/Gears: Moser 9" 3.70
nope don't touch it if you never opened up the system, sounds like she is working fine.
Thread
Thread Starter
Forum
Replies
Last Post
backtothe80s
Suspension and Chassis
33
Sep 5, 2015 12:39 AM
rsrmoore
Transmissions and Drivetrain
1
Aug 7, 2015 08:44 PM
