Hey guys I have no choice right now but to upgrade to a 4th gen rear! What do I need besides the rear. My friend has the rotors, pads and calipers. He said i need an E brake cable. What do i need and is there anything i will need that he didnt mention. Thanks guys. I need this help asap as i dont have a car right now!

 

Right; you'll need parking brake cables.

If the rear has 4-channel ABS, you'll have to re-plumb the brake hydraulic lines on it, because it will have 2 separate ones where you'll need only one.

Other than that, some brake fluid, some new rear end grease, some silicone for the pan. Maybe a new rubber line or springs or sway bar bushings & end links or whatever else you disturb in the process that you'd like to renew while you're already there.

 

Everything you need is in here:

https://www.thirdgen.org/forums/faq-...-gen-rear.html

 

where can i get the parking cable breaks?

 

you can order them online or possibly some auto stores will carry them. I know my local pepboys didnt have the part number i wanted but could order it in for me. I still have to get those cables. I've been running without the rear brake cables for a year and a half

 

its 01 ws6 rear with disc brakes what cable do i need. I did search but even with that i can not tell what cable i would need. thanks

 

I used the stock cables that came with my rear end and used some rope clamps from home depot to shorten the passenger side one, worked great.

 

did you read the links?
https://www.thirdgen.org/forums/brak...-ebrake-2.html

Tru-Torque c94597/Bendix c1647. That will work but you'll have to dremel out the ends that slip on the caliper levers, and there will be 1/4-1/2 inch extra cable slack where it attaches to the ebrake handle's equalizer. You can attach clamps to it to take up some of the slack