95 vette 6 speed trans ???

Subscribe
May 2, 2001 | 10:20 PM
  #1  
ok what trans does the 95 vette have , is it a ZF 6 speed or a T-56 6 speed ?i know the car is a c4 vette any info would be great... thanks

------------------
87 IROC-z 305 TPI 5spd Borg warner 9-bolt 3.45 posi 4 wheel disc,8.8 Accel wires , bosch platinum +4 plugs,gutted air box,k&n oil filter,synthetic oil 10w30
Reply 0
May 2, 2001 | 10:48 PM
  #2  
as far as i know it is the t-56

------------------
Brandon
"ScreaminDeamin 360"
350 60 over, TRW forged 9.83:1 pistons,Hooker Comp headers, crane cam 216/228 .484/.512, crane 1.6 RR's, ported plenum, home made ram air, 24lb SVO injectors, crane AFPR, all going through 3 inch mandrel pipe and a flowmaster.
New project-89 IROC-Jamex Springs...and thats just about it till summer!
Soon- 6 speed, Pro 5.0 shifter and 4.10's
http://users.argolink.net/bvana

http://ScreaminDeamin.cz28.com
Reply 0
May 2, 2001 | 10:59 PM
  #3  
same t-56 as a 4th gen f-body?

------------------
87 IROC-z 305 TPI 5spd Borg warner 9-bolt 3.45 posi 4 wheel disc,8.8 Accel wires , bosch platinum +4 plugs,gutted air box,k&n oil filter,synthetic oil 10w30
Reply 0
May 3, 2001 | 07:58 AM
  #4  
Nope. The rear tranny mount attaches from the sides and not the bottom.

------------------
1992 Pontiac Firebird 350/Six Speed
1987 Toyota Pickup 383/500+ HP
Reply 0
May 3, 2001 | 12:20 PM
  #5  
95 C4 corvettes all had ZF-6's

the vette didn't get the T-56 until the 1997 C5 version appeared
Reply 0
May 3, 2001 | 08:23 PM
  #6  
Quote:
<font face="Verdana, Arial" size="2">Originally posted by 1991tealRSt-topGuy:
95 C4 corvettes all had ZF-6's

the vette didn't get the T-56 until the 1997 C5 version appeared
</font>
This is correct. C4 Corvettes used ZF6's from 89 to 96. In 1997+ the C5 uses the T56.


------------------
West Coast GM Shootout 2001!
1991 Camaro Z28
5.7L 5-Speed (originally 305)
13.23 @ 107.62 MPH
Southern California
Member: SoCal 3rd Gen F-Bodies
Webmaster: SoCal F-Bodies
-=ICON Motorsports=-
Reply 0
May 4, 2001 | 12:26 AM
  #7  
i know it is supposed to be more work than a t-56 to install but can a zf6 be put in a 3rdgen? didnt the z03 show cars have them they were supposed to be the heritage edition 91/92?? what modifications need to be done? only reason i am asking is because i am getting one of these trans dirt cheap.

------------------
87 IROC-z 305 TPI 5spd Borg warner 9-bolt 3.45 posi 4 wheel disc,8.8 Accel wires , bosch platinum +4 plugs,gutted air box,k&n oil filter,synthetic oil 10w30
Reply 0
May 4, 2001 | 11:58 AM
  #8  
Yes you can put a ZF6 transmission into a thirdgen. Please search this board, its been discussed before.
Reply 0
May 4, 2001 | 02:34 PM
  #9  
ok thanks for the help everyone, i will search the boards and find out about the install, thanks again.

------------------
87 IROC-z 305 TPI 5spd Borg warner 9-bolt 3.45 posi 4 wheel disc,8.8 Accel wires , bosch platinum +4 plugs,gutted air box,TB coolant bypass ,polyurethane tranny and torque arm mounts, k&n oil filter,synthetic oil 10w30, futura GLS super sport tires 265/50/15 rear and 235/60/15 front mounted on 86 monte carlo SS rims ,

400 sbc and a 6 spd in the works
Reply 0
Subscribe