i had question on the pro built shift kit from dana for my 700r4

i comes with the vette servo correct, but does it come with the outer cover o-ring and lip seal on the vette servo?

also the check ***** - that bag that comes with it includes all the check ***** needed? or am i reusing some steel ***** as well? the seals in there are for the 2 accumulators and the 1 vette 2-3 servo i believe? the one with large and small plate

also where do the secondary filters go?

 

anyone know the part numbers for the cover 0 ring and housing 4th piston o-ring?

 

his kits are usually very complete. that guy knows his stuff. if u have questions and if there are no instructions. call him

 

i believe i need to buy the servo cover and 4th piston o-rings on my own since i dont see them in my kit as well as the snap rings/e clips

 

i would have thought it came with it. wats the kit that u got, part #?

 

If you are missing anything? Let me know asap and I will fix this. If you are not sure, call me anyways. Dana

 

i was missing the 4th piston servo o-ring and the servo housing o-ring i gave my friends transmission shop a call after trying to hunt it down at parts store with no luck. my friend hooked me up with it free

dana- if run into any other problems i give u a call

am almost done all i got to do is install the servos and drill the valve body then put it back up in the trans