I need a tremec
I need a tremec
My 305 and five speed need to go. I am about to order a 350, and I need a transmission with the ***** to back it up. From what I've read Tremecs are good. Does anyone know of a good place to order one from. The only place I've found so far is Next Generation and they seem to have a 10-15% mark up on everything. What are everyone elses experiences with the tremec 5 speed.
------------------
1989 Formula WS6
305 TBI, 5 speed
------------------
1989 Formula WS6
305 TBI, 5 speed
Forte has the 3550 for f-body
http://www.fortesparts.com/
These guys have some GM stuff also.
http://www.hanlonmotorsports.com/default.asp
[This message has been edited by dropkeel (edited December 09, 2001).]
[This message has been edited by dropkeel (edited December 09, 2001).]
http://www.fortesparts.com/
These guys have some GM stuff also.
http://www.hanlonmotorsports.com/default.asp
[This message has been edited by dropkeel (edited December 09, 2001).]
[This message has been edited by dropkeel (edited December 09, 2001).]
Try Spohn,
http://www.spohn.net/index.cfm?fusea...&categoryid=40
------------------
1986 IROC
New Crate 350 w/Vortec Heads, Edelbrock 2116 Vortec Manifold, Edelbrock Performer 2102 Cam, Edelbrock 1406 carb, Hedman shorty headers, Flowmaster Catback, Rebuilt 700r4 w/vette servo, etc..
[This message has been edited by valu8or (edited December 09, 2001).]
http://www.spohn.net/index.cfm?fusea...&categoryid=40
------------------
1986 IROC
New Crate 350 w/Vortec Heads, Edelbrock 2116 Vortec Manifold, Edelbrock Performer 2102 Cam, Edelbrock 1406 carb, Hedman shorty headers, Flowmaster Catback, Rebuilt 700r4 w/vette servo, etc..
[This message has been edited by valu8or (edited December 09, 2001).]
I know someone who has a brand new, installed but never run Tremec TKO.Here's his add from another site and forum:
All new and never used. Had to abandon because of incompatibility with exhaust.
- Tremec TKO 5-speed with F-Body adapter plate (520 ft-lb continuous use)
- Lakewood scattershield with block protector
- 10.4 inch F-body Centerforce dual friction clutch with 26 count input sline (matches TKO)
- Hays SFI approved billet steel flywheel
- Pro 5.0 billet steel adjustable shifter for F-Body console
All for $3000.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
I think his flywheel is for an externally balanced engine but everything else will work. Catch me on AIM and I'll get the two of you together if your interested.
AIM Screen Name: Fst86Z
All new and never used. Had to abandon because of incompatibility with exhaust.
- Tremec TKO 5-speed with F-Body adapter plate (520 ft-lb continuous use)
- Lakewood scattershield with block protector
- 10.4 inch F-body Centerforce dual friction clutch with 26 count input sline (matches TKO)
- Hays SFI approved billet steel flywheel
- Pro 5.0 billet steel adjustable shifter for F-Body console
All for $3000.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
I think his flywheel is for an externally balanced engine but everything else will work. Catch me on AIM and I'll get the two of you together if your interested.
AIM Screen Name: Fst86Z
Thanks for the help everyone. After knocking Next Gen, I am going to order from them. Everything there is 10% off right now, plus an additional 10% off if you order online by the end of the year. That drops the cost down to about $1380.
------------------
1989 Formula WS6
305 TBI, 5 speed
------------------
1989 Formula WS6
305 TBI, 5 speed
Senior Member
Joined: Sep 2001
Posts: 530
Likes: 0
Car: 1968 Camaro
Engine: 406
Transmission: Tremec TKO
Axle/Gears: 3.42
Are you talking TKO or T-56 since both are produced by Tremec. I've got a TKO and it's awesome.
------------------
355 c.i.
Dart 180 Heads
Lunati 224/224 cam
Harland Sharp 1.5 rockers
Performer RPM Manifold
Holley 600 cfm double pumper
Hooker Super Competition Headers
Flowmaster Exhaust
Competition Engineering Sub-frame connectors
Tremec TKO
Pro 5.0 Shifter
GM posi 3.42 rear
Hurst Roll Control
13.9@102
http://www.geocities.com/thetpiguy/index.html
chemjoker@aol.com
------------------
355 c.i.
Dart 180 Heads
Lunati 224/224 cam
Harland Sharp 1.5 rockers
Performer RPM Manifold
Holley 600 cfm double pumper
Hooker Super Competition Headers
Flowmaster Exhaust
Competition Engineering Sub-frame connectors
Tremec TKO
Pro 5.0 Shifter
GM posi 3.42 rear
Hurst Roll Control
13.9@102
http://www.geocities.com/thetpiguy/index.html
chemjoker@aol.com
Thread
Thread Starter
Forum
Replies
Last Post
topteam54
Engine/Drivetrain/Suspension Parts for Sale
9
Oct 6, 2015 12:21 AM
Maverick13
Transmissions and Drivetrain
3
Mar 28, 2001 09:26 AM




