Transmissions and Drivetrain Need help with your trans? Problems with your axle?

Rear axle swap

Thread Tools
 
Search this Thread
 
Old 05-14-2018, 08:27 PM
  #1  
Junior Member
Thread Starter
 
Blue85z28's Avatar
 
Join Date: May 2018
Posts: 6
Likes: 0
Received 0 Likes on 0 Posts
Rear axle swap

i have a 1985 camaro z28 with rear drum brakes i bought a 10 bolt with 3.73's non posi disc brake i wanna swap to the rear disc will it be as simple as just bolting it up with new brake lines can i keep the booster that is already in the car
Old 05-14-2018, 09:02 PM
  #2  
Moderator

iTrader: (5)
 
JamesC's Avatar
 
Join Date: Aug 1999
Location: Lawrence, KS
Posts: 19,282
Received 93 Likes on 68 Posts
Car: Met. Silver 85 IROC/Sold
Engine: 350 HO Deluxe (350ci/330hp)
Transmission: T-5 (Non-WC)
Axle/Gears: Limited Slip 3.23's
Re: Rear axle swap

The FAQ About 10-Bolts, a sticky at the top of the page, will answer your questions. BTW, welcome to TGO.

JamesC
Old 05-14-2018, 10:15 PM
  #3  
Junior Member
Thread Starter
 
Blue85z28's Avatar
 
Join Date: May 2018
Posts: 6
Likes: 0
Received 0 Likes on 0 Posts
Re: Rear axle swap

So is that 1le/j65 proportioning valve required to complete the swap and make the brakes work ??
Old 05-14-2018, 11:59 PM
  #4  
Supreme Member
iTrader: (1)
 
NoEmissions84TA's Avatar
 
Join Date: Feb 2017
Location: Meriden, CT 06450
Posts: 4,030
Received 511 Likes on 428 Posts
Car: 84 TA orig. 305 LG4 "H" E4ME
Engine: 334 SBC - stroked 305 M4ME Q-Jet
Transmission: upgraded 700R4 3200 stall
Axle/Gears: 10bolt 4.10 Posi w Lakewood TA Bars
Re: Rear axle swap

How to Install a 4thgen Rear into your 3rdgen
https://www.thirdgen.org/4thgenrear/
Old 05-15-2018, 05:34 AM
  #5  
Junior Member
Thread Starter
 
Blue85z28's Avatar
 
Join Date: May 2018
Posts: 6
Likes: 0
Received 0 Likes on 0 Posts
Re: Rear axle swap

Their rear end is not out of a fourth gen its from a 1987 pontiac with disc
Old 05-15-2018, 06:58 AM
  #6  
Moderator

iTrader: (5)
 
JamesC's Avatar
 
Join Date: Aug 1999
Location: Lawrence, KS
Posts: 19,282
Received 93 Likes on 68 Posts
Car: Met. Silver 85 IROC/Sold
Engine: 350 HO Deluxe (350ci/330hp)
Transmission: T-5 (Non-WC)
Axle/Gears: Limited Slip 3.23's
Re: Rear axle swap

Originally Posted by Blue85z28
So is that 1le/j65 proportioning valve required to complete the swap and make the brakes work ??
With Delco-Moraines on all four corners (J65), find a standard combination valve from an appropriate J65 car, from say 85-88 (to be safe).

EDIT: IIRC, 3.73's weren't available in 1987 from the factory, so verify what's there.

JamesC

Last edited by JamesC; 05-15-2018 at 07:10 AM. Reason: Additional Info
Old 05-15-2018, 08:55 AM
  #7  
Junior Member
Thread Starter
 
Blue85z28's Avatar
 
Join Date: May 2018
Posts: 6
Likes: 0
Received 0 Likes on 0 Posts
Re: Rear axle swap

Ya the ring gear is stamped 3.73’s might be aftermarket will the prop. Valve from flynbye work for this sawp ?
Old 05-15-2018, 10:33 AM
  #8  
Moderator

iTrader: (5)
 
JamesC's Avatar
 
Join Date: Aug 1999
Location: Lawrence, KS
Posts: 19,282
Received 93 Likes on 68 Posts
Car: Met. Silver 85 IROC/Sold
Engine: 350 HO Deluxe (350ci/330hp)
Transmission: T-5 (Non-WC)
Axle/Gears: Limited Slip 3.23's
Re: Rear axle swap

For best brake performance, I'd suggest the standard valve, one specifically designed for the setup you intend. Though the 1LE and drum valve will work, the bias will be different and braking may suffer.

JamesC
Old 05-15-2018, 01:19 PM
  #9  
Junior Member
Thread Starter
 
Blue85z28's Avatar
 
Join Date: May 2018
Posts: 6
Likes: 0
Received 0 Likes on 0 Posts
Re: Rear axle swap

do you know of a link on where i can purchase that prop valve or any idea where i can get one ?
Old 05-15-2018, 02:14 PM
  #10  
Moderator

iTrader: (5)
 
JamesC's Avatar
 
Join Date: Aug 1999
Location: Lawrence, KS
Posts: 19,282
Received 93 Likes on 68 Posts
Car: Met. Silver 85 IROC/Sold
Engine: 350 HO Deluxe (350ci/330hp)
Transmission: T-5 (Non-WC)
Axle/Gears: Limited Slip 3.23's
Re: Rear axle swap

Originally Posted by Blue85z28
do you know of a link on where i can purchase that prop valve or any idea where i can get one ?
Try bone yards or this site's classifieds. Who knows, you might get lucky at your dealership. By the way, make sure that the lines enter/exit where you current ones do and that the valve is alum (the cast iron one isn't a fit).

JamesC
Old 05-16-2018, 12:51 AM
  #11  
Junior Member
Thread Starter
 
Blue85z28's Avatar
 
Join Date: May 2018
Posts: 6
Likes: 0
Received 0 Likes on 0 Posts
Re: Rear axle swap

what year and type of car would i be looking for ????
Old 05-16-2018, 06:30 AM
  #12  
Moderator

iTrader: (5)
 
JamesC's Avatar
 
Join Date: Aug 1999
Location: Lawrence, KS
Posts: 19,282
Received 93 Likes on 68 Posts
Car: Met. Silver 85 IROC/Sold
Engine: 350 HO Deluxe (350ci/330hp)
Transmission: T-5 (Non-WC)
Axle/Gears: Limited Slip 3.23's
Re: Rear axle swap

Any thirdgen 9- or 10-bolt (the braking system is the same) with four-wheel disc brakes (J65) from around 85 to 88 to be safe.

JamesC
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Derek The Great
Transmissions and Drivetrain
9
07-31-2012 05:31 PM
spaceghost5
Transmissions and Drivetrain
1
03-27-2009 08:06 AM
IROC-You
Transmissions and Drivetrain
9
09-07-2006 11:19 AM
rwdtech
Aftermarket Product Review
4
02-10-2006 04:48 PM
rwdtech
Transmissions and Drivetrain
7
02-04-2006 03:50 PM



Quick Reply: Rear axle swap



All times are GMT -5. The time now is 07:10 AM.