What to look for in a junkyard 10 bolt
Thread Starter
Junior Member
Joined: Jun 2019
Posts: 14
Likes: 1
What to look for in a junkyard 10 bolt
I'm thinking about swapping a 10 bolt from a 4th gen into my car. The reason is because I want rear disc brakes posi traction and 3.27 gears.
My question is: can I tell what kind of condition the differential is in by pulling the diff cover and looking around? I dont want to get a axle that is going to have problems or is in poor shape.
I read the sticky.. I don't know much about this subject so I'd appreciate any advice.
My question is: can I tell what kind of condition the differential is in by pulling the diff cover and looking around? I dont want to get a axle that is going to have problems or is in poor shape.
I read the sticky.. I don't know much about this subject so I'd appreciate any advice.
Joined: Jun 2015
Posts: 2,194
Likes: 246
From: Austin, TX
Car: 90 Formula / T-tops
Engine: 305 TPI
Transmission: MD8
Re: What to look for in a junkyard 10 bolt
that would probably be a good start. look for metal shavings and gears that look worn.
Thread
Thread Starter
Forum
Replies
Last Post
BluFBdy
Transmissions and Drivetrain
8
Aug 2, 2008 12:35 AM
89Irocz23
Transmissions and Drivetrain
5
Jun 25, 2002 12:30 PM