Forcefedracing+Jamex=BAD COMPANY
Forcefedracing+Jamex=BAD COMPANY
well I must say I rate this company EXTREMELY POOR. I ordered mine over 2 1/2 WEEKS AGO and still have yet to get it. I got excited when I got the UPS Shipping Confirmation Email, thinking woo hoo next week I will have it... Well quess what I don't.
IT HAS YET TO BE SHIPPED!!!!!!!!!! WHAT THE FU(K IS UP WITH THAT?????
here's the UPS TRACKING NUMBER so yo all can see for yourself....
1Z55T3740395046193
I will advise everyone to stay AWAY FROM THIS COMPANY!.
I called and left a message AND sent them an email. I am SOOO PISSED... This has been a waste of time. I just hope I can get my money back!
IT HAS YET TO BE SHIPPED!!!!!!!!!! WHAT THE FU(K IS UP WITH THAT?????
here's the UPS TRACKING NUMBER so yo all can see for yourself....
1Z55T3740395046193
I will advise everyone to stay AWAY FROM THIS COMPANY!.
I called and left a message AND sent them an email. I am SOOO PISSED... This has been a waste of time. I just hope I can get my money back!
Supreme Member
Joined: Jul 2000
Posts: 4,541
Likes: 2
Car: 1991 Corvette Coupe
Engine: L98
Transmission: 700R4/4L60 same trans different name
ok then, forget that idea
this kinda stuff pisses me off too
i bought a Z28 grille off of ebay and it took the kid a month to send it to me cuz he was "on vacation"
well, good luck
did you ever find a 400 block??
i think a 377 is pretty cool
only aspect that concerns me is that cooling problem myth
if you think about it though, you got a nice fat bore and a short little stroke to rev with
hmmmmm, what about a 327 crank and 400 block?
something tells me it wouldnt be possible, but something else tells me it is
this kinda stuff pisses me off too
i bought a Z28 grille off of ebay and it took the kid a month to send it to me cuz he was "on vacation"
well, good luck
did you ever find a 400 block??
i think a 377 is pretty cool
only aspect that concerns me is that cooling problem myth
if you think about it though, you got a nice fat bore and a short little stroke to rev with
hmmmmm, what about a 327 crank and 400 block?
something tells me it wouldnt be possible, but something else tells me it is
Originally posted by 1991tealRSt-topGuy
did you ever find a 400 block??
i think a 377 is pretty cool
only aspect that concerns me is that cooling problem myth
if you think about it though, you got a nice fat bore and a short little stroke to rev with
hmmmmm, what about a 327 crank and 400 block?
something tells me it wouldnt be possible, but something else tells me it is
did you ever find a 400 block??
i think a 377 is pretty cool
only aspect that concerns me is that cooling problem myth
if you think about it though, you got a nice fat bore and a short little stroke to rev with
hmmmmm, what about a 327 crank and 400 block?
something tells me it wouldnt be possible, but something else tells me it is
The cooling prob is nothing to worry about. FANS!
327/400 I would not simply cause the bearings would be really odd sized. Not impossible, just more difficult. Anyways a good scat crank will rev to my hearts content.
I still have yet to repin that damn harness!. I have it laying in my living room in a box all torn down too...
I payed by paypal and after a week and a half, I e-mailed them asking about it. Miricalously it was shipped the next day and I also got an e-mail back appologizing. I would e-mail them and ask about it. Got mine a couple of days later, sealed and in perfect condition! A little slow, but for $30, can't beat it.
Originally posted by jump6pack
I payed by paypal and after a week and a half, I e-mailed them asking about it. Miricalously it was shipped the next day and I also got an e-mail back appologizing. I would e-mail them and ask about it. Got mine a couple of days later, sealed and in perfect condition! A little slow, but for $30, can't beat it.
I payed by paypal and after a week and a half, I e-mailed them asking about it. Miricalously it was shipped the next day and I also got an e-mail back appologizing. I would e-mail them and ask about it. Got mine a couple of days later, sealed and in perfect condition! A little slow, but for $30, can't beat it.
Meracurously the day after I had last called them, I checked the tracking number for $hits and giggles and it has actually been picked up and is on its way.
And no for $30 it can't be beat, bit common 4 weeks to get it?
Trending Topics
Supreme Member
Joined: Oct 2001
Posts: 1,676
Likes: 0
From: Fort Belvoir, VA USA
Car: 94 Camaro
Engine: 3.4L
Transmission: 4l60e
i guess i have been left out of the loop again
what does forcefedracing and jamex sell?
doesn't jamex make a strut tower brace or something?
what does forcefedracing and jamex sell?
doesn't jamex make a strut tower brace or something?
Originally posted by stuart69427
i guess i have been left out of the loop again
what does forcefedracing and jamex sell?
doesn't jamex make a strut tower brace or something?
i guess i have been left out of the loop again
what does forcefedracing and jamex sell?
doesn't jamex make a strut tower brace or something?
Supreme Member
Joined: Oct 2001
Posts: 1,676
Likes: 0
From: Fort Belvoir, VA USA
Car: 94 Camaro
Engine: 3.4L
Transmission: 4l60e
its only $30
its two point right?
i think i remember seeing that it was a piviting two point.
How much modding do we have to do to fit it over our extremly tall engine?
its two point right?
i think i remember seeing that it was a piviting two point.
How much modding do we have to do to fit it over our extremly tall engine?
Supreme Member
Joined: Oct 2001
Posts: 8,113
Likes: 6
From: NWOhioToledoArea
Car: 86-FireBird
Engine: -MPFI
Transmission: T5
Axle/Gears: 3:42
I think i know what your taking about. That cool jamex bar on ebay, it went for 30 bucks. Saw it posted at tomshardware.com forum???
It is sweet and it really works. You can feel the difference.
Where are they still selling them for 40 bucks??? ****, I would get another just for that price.
With certai ram air setups you may need to adjust the location. Most mount it next to the strut mount plate on top. But Instead of on top of the strut tower i did mine on the sides of it, so the bar was equal height with my TB. But in front of the TB turned sideways. It give me much more clearence.
Anyone ever think of putting one on the back shocks??? Who needs a back seat anyways.
:rockon: SLAYER :rockon:
It is sweet and it really works. You can feel the difference.
Where are they still selling them for 40 bucks??? ****, I would get another just for that price.
With certai ram air setups you may need to adjust the location. Most mount it next to the strut mount plate on top. But Instead of on top of the strut tower i did mine on the sides of it, so the bar was equal height with my TB. But in front of the TB turned sideways. It give me much more clearence.
Anyone ever think of putting one on the back shocks??? Who needs a back seat anyways.
:rockon: SLAYER :rockon:
Supreme Member
Joined: Jul 2000
Posts: 4,541
Likes: 2
Car: 1991 Corvette Coupe
Engine: L98
Transmission: 700R4/4L60 same trans different name
Originally posted by Gumby
Who needs a back seat anyways.
Who needs a back seat anyways.
j/k
Supreme Member
Joined: Oct 2001
Posts: 8,113
Likes: 6
From: NWOhioToledoArea
Car: 86-FireBird
Engine: -MPFI
Transmission: T5
Axle/Gears: 3:42
I think there is plenty of room in the front seat. stick car into first gear and put the seats all the way down. plenty of room on the passanger side but it help if the girl puts her legs up on the dash board.
Im 6'2" and I have no problems.
Im 6'2" and I have no problems. Supreme Member
Joined: Mar 2001
Posts: 1,065
Likes: 0
From: Tucson, Az, USA
Car: 1992 RS
Engine: 3.1L V6
Transmission: T5
Originally posted by 1991tealRSt-topGuy
without a backseat, me and the girl would have to spring for a 1/2 hour hotel room
j/k
without a backseat, me and the girl would have to spring for a 1/2 hour hotel room
j/k
LOL! How do you get in the backseat? That backseat is so cramped, not even I can fit back there too good let alone the horizontal mambo! I'm 5'7 and like 200 pounds so I look like a tree stump ( well not really!) Seriously, just get in the passenger seat, it reclines all the way back! I just found this out about a month ago
Supreme Member
Joined: Oct 2001
Posts: 8,113
Likes: 6
From: NWOhioToledoArea
Car: 86-FireBird
Engine: -MPFI
Transmission: T5
Axle/Gears: 3:42
Like the old yawn trick in the movies to get your arm around a chick, in a thirdgen. Lean over and give her a kiss, and as you goto wrap your arm around here, grab the seat release n in a split second she is on her back laying down. quick reach for your seat n your both out of sight and in cumfy positions.
Supreme Member
Joined: Mar 2000
Posts: 13,414
Likes: 6
From: Central NJ, USA
Car: 1986 Firebird
Engine: 2.8 V6
Transmission: 700R4
Yeah, that back seat is way too damn cramped, and the roof isn't high enough. 
Someone made a rear frame brace, on the suspension/chassis/brakes forum. An upper shock mount brace probably wouldn't be that effective, since there is no "valley" between our upper shock mounts. Imported cars have the valley of the trunk between their rear shock towers, and that's why they benefit from a brace.

Someone made a rear frame brace, on the suspension/chassis/brakes forum. An upper shock mount brace probably wouldn't be that effective, since there is no "valley" between our upper shock mounts. Imported cars have the valley of the trunk between their rear shock towers, and that's why they benefit from a brace.
Thread
Thread Starter
Forum
Replies
Last Post
LiquidBlue
History / Originality
10
Sep 13, 2015 02:24 PM





