how much of a difference is there between the two V6's, i was thinking of changing my 3.1 out for a 4.3 V6, can i do this?thanks

------------------
191(3.1)V6 1992 Pontiac Firebird,K&N drop in filter, bosch patinum spark plugs, Sony 6x9 xplods, 2" tweeters, a 12" optimus, 8" bass tube powered my a 300 watt jenson amp, check it out at www.geocities.com/my_92firebird

 

To switch in a 4.3 you will need the trans for the 4.3, the wiring harness and ECU.More or less it is equal to dropping in a v8.

------------------

http://www.camaroforum.com/
http://v6fbody.com/
http://nethirdgen.org/
http://clubs.yahoo.com/clubs/tristatecamaro

[This message has been edited by Kevin S (edited November 05, 2000).]

 

And also it wont fit the heads r too big ive herd

 

As with any engine swap you have to be willing to spend lots of time and be patient as it gets working correctly. If your looking for raw power the V8 is the way to go now if your looking ot be different like msot of us the 3.8 and 4.3 would rock. Personaly I would try and find a 3.8 turbo or build that 4.3 and super charge it... Have fun

-KMAK

 

I also wanted to do this but found out from the smog technician that it won't pass smog laws but it would pass smog though. The reason why it would be an illegal smog issue is b/c that engine is not in the same classification as a passenger car b/c it was never offerred for a GM passenger car, only the trucks. I don't know how different Texas is compared to CA when it comes to smog laws. I was also told that the engine would just not clear the strut towers as well

- Mike Harvey -

 

That sounds like a cool idea, but very time consuming aslo. Have fun.