I finally got the balls to take my V6 to the track.
I finally got the ***** to take my V6 to the track.
The best was a 17.4 @ 81mph with some wheel spin.
I cant hook worth a ****.
I also took the V8 (had my dad follow me) and it ran a 13.1 @ 103mph. Not the best of a day for me.
I cant hook worth a ****.
I also took the V8 (had my dad follow me) and it ran a 13.1 @ 103mph. Not the best of a day for me.
Guest
Posts: n/a
a cheap hook up helper, can be found at your local parts store.
get a set of those coil over spring for like 30 bucks, and pre load the drive tire good.
of course you could go with drag shocks but this is an easy hr fixer that works well.
------------------
5SPD___2.8___RAMAIR
--
--
gumbysworld.com
get a set of those coil over spring for like 30 bucks, and pre load the drive tire good.
of course you could go with drag shocks but this is an easy hr fixer that works well.
------------------
5SPD___2.8___RAMAIR
--
--
gumbysworld.com
Senior Member
Joined: Jul 1999
Posts: 760
Likes: 0
From: Chillicothe Ohio
Car: 89 RS 355/ 89 IROC Convert
Engine: Hot Cam 355/TPI 305
Transmission: All 700r4's
And you beat a TBI car with that V6? Year right.
------------------
1989 Camaro RS
305 .030 over Hydro Pistons
Vortech heads milled to 58cc...Performer RPM intake....LT4 cam..Crane Gold rockers...FastChip custom chip...ALum. Driveshaft...3.73 gears with Posi...underdrive pullys...Rebuilt 700R4 with Vette Servo and B&M shift Kit...MSD ignition...A/C Delete No SMOG junk....1997 SS leather interior...B&M Shifter... Ultimate TBI mods...14X3 K&N open Element Non-Drop...Hooker headers....3" exhaust with Flowmaster Cross flow 16X8 Wheels from 97 RS Spohn LCA's Spohn Panhard Bar..LETS PLAY FORD!!
www.geocities.com/feltsb
------------------
1989 Camaro RS
305 .030 over Hydro Pistons
Vortech heads milled to 58cc...Performer RPM intake....LT4 cam..Crane Gold rockers...FastChip custom chip...ALum. Driveshaft...3.73 gears with Posi...underdrive pullys...Rebuilt 700R4 with Vette Servo and B&M shift Kit...MSD ignition...A/C Delete No SMOG junk....1997 SS leather interior...B&M Shifter... Ultimate TBI mods...14X3 K&N open Element Non-Drop...Hooker headers....3" exhaust with Flowmaster Cross flow 16X8 Wheels from 97 RS Spohn LCA's Spohn Panhard Bar..LETS PLAY FORD!!
www.geocities.com/feltsb
<font face="Verdana, Arial" size="2">Originally posted by Brian Felts:
And you beat a TBI car with that V6? Year right.
</font>
And you beat a TBI car with that V6? Year right.
</font>
Supreme Member
Joined: Jul 2000
Posts: 4,541
Likes: 2
Car: 1991 Corvette Coupe
Engine: L98
Transmission: 700R4/4L60 same trans different name
well then baboon, it wasnt a fair fight then huh???
if you had ANY dignity you would remove that kill from you sig
thats like me saying "yeah i beat the hell outta Mike Tyson" then a year later "yeah i beat the hell outta Mike Tyson but that was after i shot him with an M16 and kick his ******* in"
if you had ANY dignity you would remove that kill from you sig
thats like me saying "yeah i beat the hell outta Mike Tyson" then a year later "yeah i beat the hell outta Mike Tyson but that was after i shot him with an M16 and kick his ******* in"
<font face="Verdana, Arial" size="2">Originally posted by 1991tealRSt-topGuy:
well then baboon, it wasnt a fair fight then huh???
if you had ANY dignity you would remove that kill from you sig
thats like me saying "yeah i beat the hell outta Mike Tyson" then a year later "yeah i beat the hell outta Mike Tyson but that was after i shot him with an M16 and kick his ******* in"
</font>
well then baboon, it wasnt a fair fight then huh???
if you had ANY dignity you would remove that kill from you sig
thats like me saying "yeah i beat the hell outta Mike Tyson" then a year later "yeah i beat the hell outta Mike Tyson but that was after i shot him with an M16 and kick his ******* in"
</font>
2011 Norwood Gathering
ThirdGen Firebird Rep
ThirdGen Firebird Rep
Joined: Jun 2000
Posts: 3,435
Likes: 4
From: Sarasota FL
Car: 99 WS6 / 00 SS / 11 CTS-V / 13 300
Engine: LS1 / LS1 / LSA / 5.7 Hemi
Transmission: 4L60E / T-56 / 6L80E / W5A80
Axle/Gears: 3.23 / 3.42 Auburn / 3.23 / 2.62
And the **** continues to fly here on the V6 board...
Trending Topics
I cant believe everyone didn't get their anger out with that "305 TBI vs my car" thread. I mean ****, with 200 something replys you would think everyone would have gotten it out of their system. Christ people get over it, a kill is a kill.
Supreme Member
Joined: Oct 2001
Posts: 1,392
Likes: 4
From: orlando, fl usa
Car: 1986 pontiac TA
Engine: 360 HSR
Transmission: 700r4 3300 yank converter
Axle/Gears: 3.27 9 bolt
<font face="Verdana, Arial" size="2">Originally posted by Brian Felts:
And you beat a TBI car with that V6? Year right.
</font>
And you beat a TBI car with that V6? Year right.
</font>
------------------
mrrjjdh03@aol.com moderator at www.fl-thirdgen.org
Thread
Thread Starter
Forum
Replies
Last Post
Pony Killer
Organized Drag Racing and Autocross
10
Sep 7, 2003 11:25 PM




