Threaded Lug Nut Covers
Thread Starter
Member
Joined: Jun 2010
Posts: 108
Likes: 0
From: PA
Car: 1988 Firebird Formula
Engine: 305 TPI
Transmission: 700r4
Axle/Gears: 3.42 Posi
Threaded Lug Nut Covers
Hey Everyone,
I am finishing up polishing and repainting my GTA wheels. I bought new black center caps and lug nut covers. The lug nut covers have threads on them? I thought the covers could just push on the lug nuts but apparently there are lug nuts with threads on the outside that the covers screw on? If this is the case let me know where I can get some of these "special lug nuts".
Thanks
I am finishing up polishing and repainting my GTA wheels. I bought new black center caps and lug nut covers. The lug nut covers have threads on them? I thought the covers could just push on the lug nuts but apparently there are lug nuts with threads on the outside that the covers screw on? If this is the case let me know where I can get some of these "special lug nuts".
Thanks
Supreme Member
iTrader: (1)
Joined: Dec 2006
Posts: 2,403
Likes: 4
From: ms. gulf coast
Car: 91 R/S , 89 dodge p/u
Engine: L31 GM crate re-cammed , 318
Transmission: T-5 , 4 speed auto
Axle/Gears: 3.42 , ?
Re: Threaded Lug Nut Covers
i have seen them at my local advance auto parts . you could also get them from dealership G.M. part #10028615 . good luck .
Joined: Aug 2006
Posts: 12,803
Likes: 103
From: Central NJ
Car: 86 Trans Am
Engine: 408 stroker sbc
Transmission: TKO600
Axle/Gears: Moser full floater m9, 3:70 trutrac
Re: Threaded Lug Nut Covers
Hey Everyone,
I am finishing up polishing and repainting my GTA wheels. I bought new black center caps and lug nut covers. The lug nut covers have threads on them? I thought the covers could just push on the lug nuts but apparently there are lug nuts with threads on the outside that the covers screw on? If this is the case let me know where I can get some of these "special lug nuts".
Thanks
I am finishing up polishing and repainting my GTA wheels. I bought new black center caps and lug nut covers. The lug nut covers have threads on them? I thought the covers could just push on the lug nuts but apparently there are lug nuts with threads on the outside that the covers screw on? If this is the case let me know where I can get some of these "special lug nuts".
Thanks
you could always just use black lugnuts and forget the cheesy plastic screw on covers.
Joined: Aug 1999
Posts: 19,282
Likes: 103
From: Lawrence, KS
Car: Met. Silver 85 IROC/Sold
Engine: 350 HO Deluxe (350ci/330hp)
Transmission: T-5 (Non-WC)
Axle/Gears: Limited Slip 3.23's
Re: Threaded Lug Nut Covers
http://www.top-downsolutions.com/ind...cdd6a21611477b
JamesC
Supreme Member
iTrader: (25)
Joined: Feb 2006
Posts: 7,260
Likes: 5
From: Manteca,California. Nor Cal.
Car: SOLD IT. Mopar guy only now.
Engine: gone
Transmission: gone
Axle/Gears: gone
Re: Threaded Lug Nut Covers
any auto parts store will have the lugnuts with the threads on them.
Thread Starter
Member
Joined: Jun 2010
Posts: 108
Likes: 0
From: PA
Car: 1988 Firebird Formula
Engine: 305 TPI
Transmission: 700r4
Axle/Gears: 3.42 Posi
Re: Threaded Lug Nut Covers
Thanks for the quick replys. Ill try to get them through pep boys and if that dosent work ill go with that top down place. Thanks!
Joined: Jul 2000
Posts: 6,519
Likes: 91
From: Aridzona
Car: `86 SS / `87 SS
Engine: L69 w/ TPI on top / 305 4bbl
Transmission: `95 T56 \ `88 200-4R
Re: Threaded Lug Nut Covers
summit sells a set of 20 new OEM lugs and covers (from slp) for reasonable $.
Trending Topics
Supreme Member
iTrader: (2)
Joined: May 2002
Posts: 4,449
Likes: 8
From: Everett, WA
Car: 87' IROC
Engine: L98
Transmission: T56
Re: Threaded Lug Nut Covers
Some cars yes, others had glued push on caps. My Camaro had these. I bought a NOS set on ebay. Then when the caps fell off again, I wised up and replaced them with McGard black coated lug nuts. They look much better and should last much longer too.
Thread
Thread Starter
Forum
Replies
Last Post
New2Chevy
Engine/Drivetrain/Suspension Parts for Sale
2
Sep 28, 2015 12:35 AM










