summit brand 15x10's
Thread Starter
Senior Member
iTrader: (5)
Joined: Dec 2008
Posts: 719
Likes: 0
From: Alabama
Car: 1986 camaro
Engine: ls2
Transmission: FLT stage 6 60e
Axle/Gears: 8.8 with 3.73's
Re: summit brand 15x10's
that and some bmfh'ing the 15x10's with a 5.5 for back spacing look like crap because they stick out some from the fender well and as most people know third gens already have a bad rep for being a ****** car.. so i went with the 6.5 b/s and it fits, no rubbing. the only thing i had to do was grind alittle on my 4th gen. calipers to get them to clear.
Thread Starter
Senior Member
iTrader: (5)
Joined: Dec 2008
Posts: 719
Likes: 0
From: Alabama
Car: 1986 camaro
Engine: ls2
Transmission: FLT stage 6 60e
Axle/Gears: 8.8 with 3.73's
Re: summit brand 15x10's
No lol. I beat the inner fender well in some with a man's hammer.
Supreme Member
iTrader: (2)
Joined: May 2002
Posts: 4,449
Likes: 8
From: Everett, WA
Car: 87' IROC
Engine: L98
Transmission: T56
Trending Topics
Supreme Member
iTrader: (15)
Joined: Oct 2003
Posts: 3,449
Likes: 5
From: Charlestown, IN
Car: 1971 Camaro
Engine: 427
Transmission: TKO600
Axle/Gears: 3.73
Re: summit brand 15x10's
I would have thought no way would those fit, but they do!
Look at these, these are 15x10 with 5" bs. 28x10.5 tire,
Look at these, these are 15x10 with 5" bs. 28x10.5 tire,
Joined: Sep 2004
Posts: 1,320
Likes: 0
From: Verona Va
Car: 86 Trans Am,03 Yukon,92 Z28
Engine: 5.3, 5.3, lb9
Transmission: th350,4l60e,700r4
Axle/Gears: 3.73,3.73,2.73
Re: summit brand 15x10's
looks great! im sold lol you running a factory 3rdgen width rear? what are the specs on the front wheels and tires?
what is "BFH'd" and "BMFH'ing"? 
Member
Joined: Sep 2011
Posts: 287
Likes: 1
From: NC
Car: 87' Firebird Formula
Engine: 350
Transmission: 700r4
Axle/Gears: 3.73
Joined: Sep 2004
Posts: 1,320
Likes: 0
From: Verona Va
Car: 86 Trans Am,03 Yukon,92 Z28
Engine: 5.3, 5.3, lb9
Transmission: th350,4l60e,700r4
Axle/Gears: 3.73,3.73,2.73
Re: summit brand 15x10's
np 
still curious to know what the specs are on the front wheels/tires this is the setup i want for my car(s) when its time to play lol.
still curious to know what the specs are on the front wheels/tires this is the setup i want for my car(s) when its time to play lol.
Thread Starter
Senior Member
iTrader: (5)
Joined: Dec 2008
Posts: 719
Likes: 0
From: Alabama
Car: 1986 camaro
Engine: ls2
Transmission: FLT stage 6 60e
Axle/Gears: 8.8 with 3.73's
Re: summit brand 15x10's
15x3.5 welds on the front i had laying around and 15x10 summit brand wheel on the back with a 6.5 inch backspacing. tires on the back are hoosier 275/50/15 radials
Thread Starter
Senior Member
iTrader: (5)
Joined: Dec 2008
Posts: 719
Likes: 0
From: Alabama
Car: 1986 camaro
Engine: ls2
Transmission: FLT stage 6 60e
Axle/Gears: 8.8 with 3.73's
Joined: Jun 2002
Posts: 13,576
Likes: 30
From: Harford County, MD
Car: camaro sportcoupe
Engine: 7.0L
Transmission: G-Force GF5R
Axle/Gears: Moser 9"
Re: summit brand 15x10's
ha, you got a lane anytime you're in my area, lol!
you going out this weekend?
you going out this weekend?
Supreme Member
iTrader: (4)
Joined: Oct 1999
Posts: 4,211
Likes: 3
From: GO PACK GO
Car: 83Z28 HO
Engine: Magnacharged Dart Little M 408
Transmission: G Force 5 speed
Axle/Gears: Moser 9" w/Detroit Trutrac
Re: summit brand 15x10's
Looks just right! I bet you did have to do some BFH'in to get 'em to fit, but well worth the effort - great work!
Junior Member
Joined: Sep 2011
Posts: 93
Likes: 0
From: abq nm
Car: 1988 TransAm
Engine: sbc 9:8:1 cr 40os slugs rhs heads
Transmission: th400 3800stall b&mkit manual vb
Axle/Gears: stock
Re: summit brand 15x10's
is your car lowered or what i got 275/60/15 on the same set up but with lowerig springs and only the lip rolled on the rear with no issue's
Thread Starter
Senior Member
iTrader: (5)
Joined: Dec 2008
Posts: 719
Likes: 0
From: Alabama
Car: 1986 camaro
Engine: ls2
Transmission: FLT stage 6 60e
Axle/Gears: 8.8 with 3.73's
Re: summit brand 15x10's
Thread Starter
Senior Member
iTrader: (5)
Joined: Dec 2008
Posts: 719
Likes: 0
From: Alabama
Car: 1986 camaro
Engine: ls2
Transmission: FLT stage 6 60e
Axle/Gears: 8.8 with 3.73's
Thread
Thread Starter
Forum
Replies
Last Post
C409
Engine/Drivetrain/Suspension Parts for Sale
5
Dec 17, 2016 09:35 PM
Dragonsys
Engine/Drivetrain/Suspension Parts for Sale
2
Sep 25, 2015 03:51 PM
