mac86

iTrader: (1)

ill go first.



photoshop:

Ruckusz28

iTrader: (3)

Good photoshop job!

mac86

iTrader: (1)

thanks, it was just somethin quick i threw together lol.

mac86

iTrader: (1)

anyone???

Johnny Blaze

iTrader: (15)

These,

http://images.search.yahoo.com/image...mb=OEjbj04A9f/

Dues to budget I got these, and painted the centers gold myself with eastwoods vintage wheel paint
http://images.search.yahoo.com/image...mb=OEjbj04A9f/

mac86

iTrader: (1)

sweet lookin rims, good choice

carlos64030

iTrader: (1)

My dream wheels are custom made Trans Am GTA wheels in sizes 18x9 for the front and 18x12 for the rear. I plan to have them made sometime in 2013 after I finish up everything else with my car.

watajob

iTrader: (29)

Mini tub? If not, those 12's are going to be sticking way out.

My favorite?



18x9/10

DBLTKE

iTrader: (1)

Work Meister S1's

LivinLarge

What color and sizes would you get? I think those would look badass on a third gen!

Johnny Blaze

iTrader: (15)

All sizes but 15"s have been discontinued according to the site

DBLTKE

iTrader: (1)

Sorry, I should clarify. I posted a picture of the 2 piece S1R which has a slightly redesigned face. it's available in 16-19"

The regular 2 piece S1 has old style face and only comes in 15" now.

The 3 peice S1 has the old style face but is available 18-19"

These are the wheels I plan on getting. I still keep going back and forth between the S1R and the 3 piece S1. I would get 19x11 +10 front and 19x12 +20 rear.

morrow

dream wheels???? ohhh dare i say it ;]

GA1R center locking forgline concave wheels, 18x10 front, 18x11.5 rear........black with red nut

http://blog.forgeline.com/2011/08/30...etition-wheel/

its 8,000 for the hubs and wheels

morrow

http://www.forgeline.com/products/ce...large=1&asdf=1

Ruckusz28

iTrader: (3)

Tenzo R Type M in Matte Bronze - I just REALLY wished these wheels were available wider. I did my research and I'd really have to go with a 5x4.5 and run adapters.

I just wasn't positive if the +25, +37, +45 offset would work. I'm still considering running these in the spring.

http://www.elementwheels.com/proddet...n-typemv1188bz

FConn3

rickwise

I'm an old school kind of guy. Rallye wheels, Crager S/S, or Crager Keystone. Can't help it, I'm from that time era.

Twin_Turbo

iTrader: (25)

The wheels on the vette are my dream wheels too, awesome concave. until I saw the price tag LOL

carlos64030

iTrader: (1)

Yes, I'm definitely mini-tubbing my GTA. I had mini-tubs installed on my '97 WS6 last year so I could fit 19 x 13 wheels and 345-30-19 tires and not have them sticking out from under the quarters. The ride height is also very important to me. I think it came out extremely well, and this is the same look I'm going for with my GTA.

watajob

iTrader: (29)

That stance is THE best looking 4thgen I've ever seen. I'd love to have a mini tub done on my 'vert so I could tuck 315/30-18 on the rear but I'm too big of a cheapskate!

nhgator

Me too,when I bought my car I found a set of Rallye II's and color matched them to the car.

carlos64030

iTrader: (1)

Thank you, sir.

InfernalVortex

iTrader: (4)

Be careful with those boutique wheel companies, especially the ones in Miami and California. The vast majority of them use cheap chinese parts and just assemble the wheels here. They are not JWL or TUV certified. If you actually get around to buying them, try to stick to wheels that are either JWL/TUV certified or have a proven record and are used on professional race cars.

https://www.thirdgen.org/forums/auto...-should-i.html


I think my dream wheels would be some CCW's (which are NOT JWL or TUV approved, but have a long, proven track record), but I'd have them in dark silver or a bronze-ish color.

8t2 z-chev

there is an '80s era jongbloed wheel i'd like to find a set of-as i recall they have 6-spoke forged aluminum center gold anodized with spun aluminum rim halves bolted on.I have only seen 15" version,but pics were early '80s.

brdofpry85ta

iTrader: (1)

I have a few on my list......I really like the strieght or split 5 spoke style.....
And mini-tub all the way....

brdofpry85ta

iTrader: (1)

gotta have the deep lip.....

brdofpry85ta

iTrader: (1)

and these.....

Rabble

I'd kill for a set of these

Ruckusz28

iTrader: (3)

Thanks to MAC for shopping these onto my ride. I think this is the way i'm going come spring.

Anti-Venom

I'm diggin these "this week" Maybe even with the centers gold with a polished lip. Somewhat of a retro look in keeping the gta wheel colors.
And here's the Jongbloed's 8t2 Z-Chev I think is referring too.

Twin_Turbo

iTrader: (25)

Those jongbloeds are mine. I think 8tz means the 6 spoke ones like this

8t2 z-chev

those are the ones The jongbloeds in reply #30 are pretty nice too.

8t2 z-chev

checked jongbloed's current offerings and ANY of those would look good on a thirdgen very expensive and exotic though with forged aluminum and magnesium parts.Made in California USA

blackbmagic

Quoted $7,500 for a staggered set 18x9 and 19x10. A little too much for forged one piece wheels without tires. But hey I can dream too.

Twin_Turbo

iTrader: (25)

Adv1 briefly offered a spin cast wheel at less than half that price but only in 20s and I think they are discontinued. Flowspec was what they were called

87350IROC

iTrader: (2)

Make sure you do your homework on ADV.1 before ordering.

Twin_Turbo

iTrader: (25)

That's a little like the flowspec wheel that was much much cheaper.

Twin_Turbo

iTrader: (25)

BTW, the wheel in the pic is the same design as the flowspec wheel that I mentioned those were around 3500. Another option is the VMR 705, it doesn't have the concavity that the ADV1s have but the 19x9.5 rears are pretty concave and would work nice w a set of 8.5s up front. the fronts are around ET 25, the rears 33 if I'm not mistaken.

Projekt IROC

BBS CH-R

blackbmagic

I spoke with both VMR as well as ADV.

ADV got back to me within hours and multiple times, and VMR took over a week to get back with one answer. That says something.

The VMR 705's require a spacer to run them, while the ADV 5.1 are made to order.

ADV 5.1 can be as wide as you want. VMR 705's are only 9.5 at the widest.

VMR 705 are sub 3K for a 18 19 staggered set, while ADV was over 7K.

I dont really see myself with the 705's as they dont really peak my interest because of size and lack of concavity. Id love to own a set of ADV5.1's, but over 10K for wheels and tires exceeds the value of my car as of right now, maybe in the future who knows

Twin_Turbo

iTrader: (25)

The VMRs will not require a spacer, I have had ET 35 bimmer wheels on the front, 8.5 wide...not a problem. If you have upgraded brakes w/ a seperate disc or 1LE hub conversion, even better as it pushes the wheel out. The ET22s are perfect for the rear.

You can get a 295 tire on a set of 9.5s, that's probably more tire than most here have

I have seen the VMRs for just a little over a grand.

blackbmagic

Just relaying what vmr told me over the phone. They gave me the exact size spacers I would need for the staggered set.

Twin_Turbo

iTrader: (25)

What size did they say you needed?

Manic Z

iTrader: (1)

Fikse FM5`s for camaros:
http://s975.beta.photobucket.com/use...82466470974901



Fikse FM10`s for firebirds:
http://s975.beta.photobucket.com/use...89903042984736

Johnny Blaze

iTrader: (15)

Agree. Though I have 'mesh' wheels on my camaro, I think 5 spokes are more appropriate, and mine would be better for a bird.

blackbmagic

Sorry, its been awhile. Off the top of my head I believe it was ~20mm/ ~40mm spacers for the staggered setup. Not 100% sure so don't quote me.

Al Hasse

+25 offset will probably work. My 17" X 8.5" C5 Z06 replicas are +26 offset and require no spacers.

RubberDucky

iTrader: (4)

mac86

iTrader: (1)

..

paul_huryk

Maybe I'm biased...