Im selling these for a friend. They were on his 383. His car ran mid to low 12s on the motor and high 10's on the spray! These heads were just freshened up last year, and used for one season. They had a 3 angle valve job done, and at the same time had the Trick Flow Valve Spring upgrade installed. The springs are good for about .600" lift. They have 64cc chambers.

Asking price: $1000. These are some awesome heads, with some good upgrades! Very low miles since they were at the machine shop!

Edit: here is a link to what they sell for at Summit with the spring upgrade. You're definitely getting a hefty discount!

http://store.summitracing.com/partde...5&autoview=sku

 

pictures of the heads. Nice and beefy with room for porting! These heads are SUPER clean!!! I will also throw in some Trick Flow 1 piece pushrods too, for FREE!!!

 

The link you put up is for CNC-Profiled 23 degree heads which cost $1,475.95 The regular 195 Trick flow heads part # 30400007 costs $1,285.95. Are these CNC heads or the regular. I'm looking at a Summit Catalog right now. Thanks.

 

good catch. These are not the CNC heads. I revised the link above

 

bump

 

Sounds like a good deal...too bad ive already spent too much money on the car this year and im not digging into the motor yet.

 

pick them up on the cruise, save them for later

 

bump before ebay

 

PM's replied to.

 

bump

 

Will these work on an 89 L98. If so I am interested.

 

Yes they are "stock replacement" heads and come with the correct pushrods too.

 

Get me a shipping quote to 42223, i just had a rocker arm mounting bolt back out and fly around my valvetrain for a couple passes at the track wasnt bad until it finally came out and i heard it knocking around , tore up my crane 1.6's and a couple pushrods got bent up.. pretty damn interested.. let me know.. thanks

 

Got the parts yesterday and everything looks great! Thanks for the great deal!