I just took my modified LT1 off my car to put a carb on. I bought it used so dont know who it was converted by. I do know that there are no oil or coolant leaks anywhere. I put this on an engine i built about 2 years ago and probably ran it for 6 hours total. I would like to sell the whole setup if possible. I have the intake, rails, adjustable FPR, accel 36lb injectors, 58mm BBK throttle body (intake is port matched to TB) remote T-Stat housing, fuel lines that bolt up to 3rd gen, all necessary fittings and heater hoses, and the throttle, cruise, and TV cable bracket. I bought everything new except the intake, rails, lines, and throttle body. I am located in TX. I would like to get at least $750 for this setup. I will throw in the small cap distributor and coil for another $50.

 

Any interest? If i dont get any responses by tonight this stuff is going on ebay.

 

Still available people, make some offers.

 

Well, on LT1intakes.com they go for 400 new with fuel rails, and gaskets and everything.

 

Not with a rails, 58MM bbk TB, accel 36lb injectors, adjustable fpr, remote t-stat, hoses, and fuel lines.

 

Very true, Sorry. this is a good deal. I did not see all that listed until now.

 

Someone is bound to need or want this. $700 shipped, with distributor?

 

Price update. $550 with no injectors! Someone take this thing off my hands.

 

Ok people make some offers. I really need out of this thing. I have tons of bills to pay. Injectors are gone. I'll throw in the distributor. So it will come with the intake, rails, bbk 58mm TB, fuel lines for 3rd gen, remote t-stat and cooling hoses to intake, distributor, and adustable FPR.

 

i'm interested do you have any pics?

 

no i dont but i can take some later tonight if you'll wait a bit.

 

Pictures!


http://www.er-cs.com/P1060542.JPG
http://www.er-cs.com/P1060543.JPG
http://www.er-cs.com/P1060544.JPG
http://www.er-cs.com/P1060545.JPG
http://www.er-cs.com/P1060546.JPG
http://www.er-cs.com/P1060547.JPG
http://www.er-cs.com/P1060548.JPG

 

Do you still have this?

 

pm sent

mrtater

 

yes i do. its still for sale, minus the injectors. $550 shipped. Let me know.

 

BUMP! This is still available minus injectors and TB. $400

 

how much you want for the fuel lines?

 

PM sent

 

$400, and you get the rest of the stuff too.

 

rofl awesome =)

I can't believe nobody's picked this up yet.

 

Neither can I. Just so anyone else asks, i'm not taking any more parts off of this thing. Intake, rails, lines, and APFR are staying together.

 

I hate to ask given what you just said, but you did not say anything about the remote t-stat and hoses. Are you willing to sell them seperate?

If not well at least you get another bump

 

ya im interested in the AFPR too...

 

I knew i forgot something. No, i'm keeping the hard to find pieces all together. Once again, here is what is left and what is for sale AS A WHOLE. for $400. So people DO NOT waste your time asking me if i'll sell any other pieces. This is bargain. Someone will come around and take the whole thing.


Manifold
Fuel Rails
Fuel Lines
AFPR
Remote T-Stat Housing and hoses. (No water neck)
Distributor

 

Ok, thanks. This is a good deal.

To bad I already have the dist, rail, afpr and manifold. I need everything else lol.

 

Well, you can still buy it and put the remaining parts up for sale. From the looks of it everybody needs everything but the whole setup. I'm just not going to part it anymore because knowing my luck someone will come around saying, "i have the money and want it but i need xxxxxx and i cant find it anywhere!!"

 

Still got it for sale?

 

dont need a inake set up whe nI have a lt1!!!!!! just need the line,,,,,

 

Yes, Konartist its still for sale.

 

Looked thru the pictures and it is hard to tell.... is this also tapped in the front for the water lines or just the rear?? guessing the water lines are just laying there to show what you get and not where they connect to... was this on your 91??? i want to put it on a 89 350 so are the correct bolt holes already drilled or do they need to be elongated??? have any pictures of when it was installed??? and does this still come with the cable bracket.....

Thanks
Bill

 

i would be willing to go 325 shipped for everything in the pics plus the dist

 

Water lines are in the rear of the intake.. Yes it was on my 91. Bolt holes are enlongated. They were like before i bought it. They arent very pretty since they were added but they work and the intake did not leak whatsoever. Scooter, $400 is pretty firm right now for this stuff. It also comes with map and temp sensors and cable bracket.

 

SOLD