Valve Covers VOODOO CAM TORQUE ARM MOUNT
Thread Starter
Joined: Apr 2002
Posts: 62
Likes: 0
From: Highland Twp MI
Car: 1986 IROC-Z
Engine: 383 TPI
Transmission: 700R4 2500 stall
Axle/Gears: 3.70 Moser 9in
Valve Covers VOODOO CAM TORQUE ARM MOUNT
I have a nice pair of Moroso polished aluminum short center bolt valve covers. They will clear crane roller rockers too! 75.00 plus shipping
Lunati 60103 VOODOO cam Low hours used for dyno pulls.Includes Hydraulic Lifters(NON ROLLER CAM) Chevy 262-400 1957 and up.
RPM-1800-6200 227/233 .489/.504 Sells in summit for 195.00
130.00 Plus shipping
Polyurathane torque arm mount includes bracket for mounting so you wont have to drill your rivits out. 15 plus Shipping.
Lunati 60103 VOODOO cam Low hours used for dyno pulls.Includes Hydraulic Lifters(NON ROLLER CAM) Chevy 262-400 1957 and up.
RPM-1800-6200 227/233 .489/.504 Sells in summit for 195.00
130.00 Plus shipping
Polyurathane torque arm mount includes bracket for mounting so you wont have to drill your rivits out. 15 plus Shipping.
Senior Member
iTrader: (5)
Joined: May 2005
Posts: 831
Likes: 1
From: Midwest IL
Car: 1984 Z28
Engine: Alky 360
Transmission: TH400, Freakshow 9.5"
Axle/Gears: 9" 4.71
Re: Valve Covers VOODOO CAM TORQUE ARM MOUNT
Interested in cam, are the lifters lunati as well, and are they marked for correct positioning ( as which lobe they were used on when it was broken in). Shipping to 61615
Thread Starter
Joined: Apr 2002
Posts: 62
Likes: 0
From: Highland Twp MI
Car: 1986 IROC-Z
Engine: 383 TPI
Transmission: 700R4 2500 stall
Axle/Gears: 3.70 Moser 9in
Re: Valve Covers VOODOO CAM TORQUE ARM MOUNT
Shipping will be $15.00. The lifters were not marked when pulled. Let me know if you interested still?
Thread Starter
Joined: Apr 2002
Posts: 62
Likes: 0
From: Highland Twp MI
Car: 1986 IROC-Z
Engine: 383 TPI
Transmission: 700R4 2500 stall
Axle/Gears: 3.70 Moser 9in
Re: Valve Covers VOODOO CAM TORQUE ARM MOUNT
Shipping for the torque arm mount was quoted at 12.05 ill do it for 10.00. So 25.00 total.
Trending Topics
Supreme Member
iTrader: (7)
Joined: Aug 2005
Posts: 1,068
Likes: 1
From: Ohio, near columbus
Car: 89 iroc-z
Engine: 305tpi
Transmission: wc-t5
Axle/Gears: 10 bolt 3.08 posi (4 now)
Re: Valve Covers VOODOO CAM TORQUE ARM MOUNT
will you go 20 on the torque arm mount shipped to 43056? pm me either way i'll probably still pick it up even if 25 is ur lowest gotta check prices on new is all.
Thread Starter
Joined: Apr 2002
Posts: 62
Likes: 0
From: Highland Twp MI
Car: 1986 IROC-Z
Engine: 383 TPI
Transmission: 700R4 2500 stall
Axle/Gears: 3.70 Moser 9in
Re: Valve Covers VOODOO CAM TORQUE ARM MOUNT
Covers were sold a while back...sorry bud.
BUMP for Torque arm mount!
BUMP for Torque arm mount!
Thread Starter
Joined: Apr 2002
Posts: 62
Likes: 0
From: Highland Twp MI
Car: 1986 IROC-Z
Engine: 383 TPI
Transmission: 700R4 2500 stall
Axle/Gears: 3.70 Moser 9in
Re: Valve Covers VOODOO CAM TORQUE ARM MOUNT
Well your area code pulled up alot of citys. If it went to Bluffton ups quoted me 12.71. So yea id do 25 shipped. Thanks, Kenny
Thread
Thread Starter
Forum
Replies
Last Post
NBrehm
Engine/Drivetrain/Suspension Parts for Sale
1
Aug 25, 2015 11:49 PM
