SB stuff
#1
Junior Member
Thread Starter
iTrader: (2)
Join Date: Oct 2007
Location: Grand Rapids, MI
Posts: 54
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1990 Firebird
Engine: 600 hp 353.4 CI
Transmission: TH-350/B&M3000
Axle/Gears: 10 bolt 3.23
SB stuff
Going BB so I'm getting rid of all my SB stuff. Basically I'm looking to get rid of this stuff, but not give it away. I'm open to offers on everything. Price is just a base price, not set in stone.
- Cast 350 pistons with 'X' rods $20
- Stock 350 Crank w/ polished journals $20
- Holley 600cfm carb; Model #1850 $50
- Lunati 4340 Forged Connecting Rods; Recond. & Ready to install $150
- Lunati Voodoo cam w/ lifters; 233/241 @ .050, less than 500 miles $100
- Comp Cams Double Roller Timing Set NIB $30
- Milodon oil pan w/ Milodon pickup & gasket NIB $150
- Melling HV oil pump w/ ARP oil pump shaft NIB $25
- SB long-tube headers $50
Also have a few other chrome accesories. Possibly looking to get rid of some Ross forged pistons also.
- Cast 350 pistons with 'X' rods $20
- Stock 350 Crank w/ polished journals $20
- Holley 600cfm carb; Model #1850 $50
- Lunati 4340 Forged Connecting Rods; Recond. & Ready to install $150
- Lunati Voodoo cam w/ lifters; 233/241 @ .050, less than 500 miles $100
- Comp Cams Double Roller Timing Set NIB $30
- Milodon oil pan w/ Milodon pickup & gasket NIB $150
- Melling HV oil pump w/ ARP oil pump shaft NIB $25
- SB long-tube headers $50
Also have a few other chrome accesories. Possibly looking to get rid of some Ross forged pistons also.
#3
Senior Member
iTrader: (8)
Join Date: Feb 2008
Location: Lowell, Michigan
Posts: 550
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1988 Trans Am, 2005 Sierra 2500
Engine: Vortec 357
Transmission: Built TH700R4 with 26-2800 Stall
Axle/Gears: GM 10 bolt 3.73 Posi
Re: SB stuff
what kind of chrome accecories? send pics of the chrome parts to JSimba711@NetZero.com
Also will the cam fit a stock 305 engine and not require alot of tuning?
Also will the cam fit a stock 305 engine and not require alot of tuning?
#5
Junior Member
Thread Starter
iTrader: (2)
Join Date: Oct 2007
Location: Grand Rapids, MI
Posts: 54
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1990 Firebird
Engine: 600 hp 353.4 CI
Transmission: TH-350/B&M3000
Axle/Gears: 10 bolt 3.23
Re: SB stuff
TADailyDriver,
I have a chrome dipstick, chrome alternator brackets and a chrome timing cover. I will get some pics tonight. The cam will fit your 305 without pretty much any tuning. The most it might require one of those vaccum canisters.
Redbandit98,
I can do 160 shipped for the setup. It should fit your monte carlo without issue, just to be safe it's part #30401 through summit.
I have a chrome dipstick, chrome alternator brackets and a chrome timing cover. I will get some pics tonight. The cam will fit your 305 without pretty much any tuning. The most it might require one of those vaccum canisters.
Redbandit98,
I can do 160 shipped for the setup. It should fit your monte carlo without issue, just to be safe it's part #30401 through summit.
#6
Supreme Member
iTrader: (13)
Join Date: Apr 2005
Location: Not in Kansas anymore
Posts: 7,732
Likes: 0
Received 11 Likes
on
11 Posts
Car: 82 Z28
Engine: 383 SP EFI/ 4150 TB
Transmission: T400
Axle/Gears: QP 9" 3.73
Re: SB stuff
Lunati 4340 Forged Connecting Rods; Recond. & Ready to install $150
Lunati Voodoo cam w/ lifters; 233/241 @ .050, less than 500 miles $100
Comp Cams Double Roller Timing Set NIB $30
What length rods?
Cam; HR or flat tappet , Lunati part #?
Comp part # on timing chain?
Lunati Voodoo cam w/ lifters; 233/241 @ .050, less than 500 miles $100
Comp Cams Double Roller Timing Set NIB $30
What length rods?
Cam; HR or flat tappet , Lunati part #?
Comp part # on timing chain?
Trending Topics
#8
Junior Member
Thread Starter
iTrader: (2)
Join Date: Oct 2007
Location: Grand Rapids, MI
Posts: 54
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1990 Firebird
Engine: 600 hp 353.4 CI
Transmission: TH-350/B&M3000
Axle/Gears: 10 bolt 3.23
Re: SB stuff
vetteoz,
The rods are 5.7,
The cam is a flat tappet, part #60104 except with lifters.
Can't remember the part # of the timing chain off the top of my head,
But pretty sure it's the Magnum one, I think it's like $35-$40.
The rods are 5.7,
The cam is a flat tappet, part #60104 except with lifters.
Can't remember the part # of the timing chain off the top of my head,
But pretty sure it's the Magnum one, I think it's like $35-$40.
#13
Junior Member
Join Date: Jan 2004
Location: NH
Posts: 32
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1985 Z28
Engine: 350
Transmission: T-5
Axle/Gears: 3.23
#14
Member
iTrader: (14)
Join Date: Mar 2000
Location: Painesville, Ohio USA
Posts: 254
Likes: 0
Received 2 Likes
on
2 Posts
Car: 1989 IROC Z28
Engine: 305 TBI (L03)
Transmission: 700R4 w/ Corvette servo
Axle/Gears: 4th Gen, 3.23, posi, PBR
Re: SB stuff
Interested if not sold ...
Is the timing chain / gear set Comp Cams #2136?
Does the chrome timing chain cover allow the extra depth required by the double roller chain? Pics to crg381@yahoo.com?
Is the timing chain / gear set Comp Cams #2136?
Does the chrome timing chain cover allow the extra depth required by the double roller chain? Pics to crg381@yahoo.com?
#20
Junior Member
Thread Starter
iTrader: (2)
Join Date: Oct 2007
Location: Grand Rapids, MI
Posts: 54
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1990 Firebird
Engine: 600 hp 353.4 CI
Transmission: TH-350/B&M3000
Axle/Gears: 10 bolt 3.23
Re: SB stuff
Here's what I got left:
- Ross Forged pistons; Bore: 4.150; VERY good shape. $200
- Lunati 4340 Forged Connecting Rods; Recond. & Ready to install $150
- Melling HV oil pump w/ ARP oil pump shaft NIB $25
- SB long-tube headers $50
- Ross Forged pistons; Bore: 4.150; VERY good shape. $200
- Lunati 4340 Forged Connecting Rods; Recond. & Ready to install $150
- Melling HV oil pump w/ ARP oil pump shaft NIB $25
- SB long-tube headers $50
#23
Junior Member
Thread Starter
iTrader: (2)
Join Date: Oct 2007
Location: Grand Rapids, MI
Posts: 54
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1990 Firebird
Engine: 600 hp 353.4 CI
Transmission: TH-350/B&M3000
Axle/Gears: 10 bolt 3.23
Re: SB stuff
Primaries are 1 5/8" with 3" collectors. Pretty sure they're hookers.
#24
Junior Member
Thread Starter
iTrader: (2)
Join Date: Oct 2007
Location: Grand Rapids, MI
Posts: 54
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1990 Firebird
Engine: 600 hp 353.4 CI
Transmission: TH-350/B&M3000
Axle/Gears: 10 bolt 3.23
Re: SB stuff
Well have some more stuff I'm trying to get rid of. Need to pay for my shortblock! Feel free to make offers!
-Ross forged pistons(10): 4.150", $130 shipped
-(7) Comp cams H-beams(Part # 5570-8)- $100 shipped
-(7) Forged 6" I-beams- $100 shipped
-(7) Forged Diamond 11cc domed pistons- $110 shipped.
I checked with Diamond and you can order 1 more of these
- NIB Melling HV oil pump with ARP shaft- $35 shipped
- NIB Autometer Elec. Oil Press. gauge w/ sender & fittings- $35 shipped.
- NIB ZZ502 Hydraulic roller cam with lifters; 224/234 @.050, .527/.544 lift
Looking for $160 shipped.
- Also have a set of Hooker SB long tube headers- $100 shipped.
These have 1 5/8" primaries with 3" collectors, Part # 2451HKR
-Ross forged pistons(10): 4.150", $130 shipped
-(7) Comp cams H-beams(Part # 5570-8)- $100 shipped
-(7) Forged 6" I-beams- $100 shipped
-(7) Forged Diamond 11cc domed pistons- $110 shipped.
I checked with Diamond and you can order 1 more of these
- NIB Melling HV oil pump with ARP shaft- $35 shipped
- NIB Autometer Elec. Oil Press. gauge w/ sender & fittings- $35 shipped.
- NIB ZZ502 Hydraulic roller cam with lifters; 224/234 @.050, .527/.544 lift
Looking for $160 shipped.
- Also have a set of Hooker SB long tube headers- $100 shipped.
These have 1 5/8" primaries with 3" collectors, Part # 2451HKR
#30
Junior Member
Join Date: May 2008
Location: NKY
Posts: 1
Likes: 0
Received 0 Likes
on
0 Posts
Car: 89 Camaro, 92 Chevy 1500
Engine: 400sbc
Transmission: th400
Axle/Gears: 2.73 posi
#31
Junior Member
Thread Starter
iTrader: (2)
Join Date: Oct 2007
Location: Grand Rapids, MI
Posts: 54
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1990 Firebird
Engine: 600 hp 353.4 CI
Transmission: TH-350/B&M3000
Axle/Gears: 10 bolt 3.23
Thread
Thread Starter
Forum
Replies
Last Post
LT1Formula
Engine/Drivetrain/Suspension Parts for Sale
7
10-08-2015 08:34 PM