Spohn T56 Cross Member & Torque Arm
Thread Starter
Member
iTrader: (2)
Joined: Oct 2003
Posts: 428
Likes: 5
From: Buffalo, NY
Car: 1987 Camaro IROC-Z28
Engine: TPI 350ci L98
Transmission: T56 - Hurst Shifter
Axle/Gears: BW - 3.70
Spohn T56 Cross Member & Torque Arm
SOLD!!!
I’m selling this Spohn T56 (93-97 LT1 Style) cross member and torque arm. It has the front drive shaft loop and polly bushing. It’s powder coated red. I’ve had this on the car for about 2 or 3 years and have now changed my setup so I don’t need it anymore. The power coating is chipped off on the bottom lip of the cross member from hitting a speed bump to fast. There are a few other minor chips/scrapes on the torque arm where it attaches to the rear. Also, there are two small holes in the cross member that I drilled for an exhaust hanger I had made. Overall this piece is in good condition. I’d give it an 8 out of 10 visually and a 10/10 mechanically. I paid $435 when I bought it. Spohn now sells it for $410 + shipping.
I’ll sell for $375 shipping included.
SOLD!!!
I’m selling this Spohn T56 (93-97 LT1 Style) cross member and torque arm. It has the front drive shaft loop and polly bushing. It’s powder coated red. I’ve had this on the car for about 2 or 3 years and have now changed my setup so I don’t need it anymore. The power coating is chipped off on the bottom lip of the cross member from hitting a speed bump to fast. There are a few other minor chips/scrapes on the torque arm where it attaches to the rear. Also, there are two small holes in the cross member that I drilled for an exhaust hanger I had made. Overall this piece is in good condition. I’d give it an 8 out of 10 visually and a 10/10 mechanically. I paid $435 when I bought it. Spohn now sells it for $410 + shipping.
I’ll sell for $375 shipping included.
SOLD!!!
Last edited by vbMike; Dec 21, 2009 at 12:16 PM. Reason: SOLD
Thread Starter
Member
iTrader: (2)
Joined: Oct 2003
Posts: 428
Likes: 5
From: Buffalo, NY
Car: 1987 Camaro IROC-Z28
Engine: TPI 350ci L98
Transmission: T56 - Hurst Shifter
Axle/Gears: BW - 3.70
Re: Spohn T56 Cross Member & Torque Arm
I'm going to sell them as a pair. I don't think the torque arm would be much good without the cross member.
Supreme Member
iTrader: (35)
Joined: Aug 2006
Posts: 1,470
Likes: 1
From: Mississauga,Ont,Canada
Car: 89 IROC
Engine: LSX 6.0 370, TU2 Cam, Fast intake
Transmission: T56 w/ lots of goodies
Axle/Gears: 8.8, Posi, 4.10, 31 Spline
Re: Spohn T56 Cross Member & Torque Arm
will you ship them to canada for 375 as im interested for sure
Want a title? Post!
Joined: Feb 2008
Posts: 0
Likes: 0
From: Marysville Oh
Car: 1987 IROC Z28
Engine: 383 Carb.
Transmission: T56 Built
Axle/Gears: 9in 3.73 with 4th GEN Rear Brakes
Re: Spohn T56 Cross Member & Torque Arm
do you still have the t56 torquearm for sale
Trending Topics
Thread Starter
Member
iTrader: (2)
Joined: Oct 2003
Posts: 428
Likes: 5
From: Buffalo, NY
Car: 1987 Camaro IROC-Z28
Engine: TPI 350ci L98
Transmission: T56 - Hurst Shifter
Axle/Gears: BW - 3.70
Re: Spohn T56 Cross Member & Torque Arm
I might be able to do that. Could you give me an address so I can see how much shipping would be. You can PM me if you prefer.
Thread
Thread Starter
Forum
Replies
Last Post
ambainb
Camaros for Sale
11
Apr 25, 2016 09:21 PM
Dialed_In
Firebirds for Sale
2
Aug 20, 2015 01:45 PM
