claytonjn

iTrader: (5)

I'm working on getting my 1992 Camaro Convertible to my liking. Here's a list of all the parts I'm looking for. Most of these things I don't need right away, so the price will pretty much determine if I purchase these now or not.

I'll update this list as I receive parts and find more I need.

• Seats: I'm looking for black rear split-back seats, and tracks/switch/trim to make my Lear Seigler Conteur seats power. I'm also interested in getting a passenger side Conteur seat or power Conteur seats from an '86. Or any seats from other cars with built in seatbelts (like from BMW convertibles)
• Couple black plastic trim screws
• Convertible tonneau release switch (white text, not faded or smugged)
• Wiper/Cruise control (white text, not faded or smugged)
• Black floor mats
• Black rear panels (from a 92 vert - should have lights and no cutouts for lap belts)
• 92 Camaro (Convertible) owners manual

Interior is currently tan, but I'm switching it to black. I'll probably have to take it somewhere for the seats, door panels and sail panels but I am still open to offers for those things, and anything else that I need and forgot to mention. I'm also open to pretty much any cool aftermarket things I can add.

If you have any of these you're willing to spare let me know! Pics will be greatly appreciated.

I'm also looking for exterior parts (here: https://www.thirdgen.org/forums/exte...nted-92-a.html) and engine/drivetrain/suspension parts (here:https://www.thirdgen.org/forums/en...nted-92-a.html (Engine parts wanted for '92 Camaro Convertible)) so check those out and see if you have anything else I'm looking for.

Please tell me how much you want, including shipping to 48323.

Thanks!
Clayton

RCAR7395

iTrader: (124)

I got tons of black plastics. They are $250.00 + shipping for a full set but I will go in on the shipping and call it $275.00 shipped in U.S. If you buy a set of plastics the I will throw in a hatch motor at $25.00 so $275.00 shipped for it all. I have tons of references.
Lmk
Thx
Ray

claytonjn

iTrader: (5)

That sounds like a good offer, but at the moment I am more concerned about the functional stuff than the aesthetic stuff and I don't think I'll be able to afford that much. How much would you want for just a pull-down trunk motor?

RCAR7395

iTrader: (124)

$50 shipped in U.S. for the hatch pulldown motor.
Pay pal is below if interested.
Lmk
Thx
Ray

ted gerlach

iTrader: (28)

i have the correct, black rear convert panels, and you can make camaro door panels work with cup holders,

claytonjn

iTrader: (5)

What year car is it from? Does it have tan plastic or metal housing? I'm assuming it's working? Thanks!

claytonjn

iTrader: (5)

How much do you want for them?

RCAR7395

iTrader: (124)

Tan plastic housing, 91 bird if i remember correctly. Yard car and never tested. I guarentte it though. LMK
Thx
Ray

my82roc

iTrader: (101)

I have the following parts
Pull-down trunk motor (must be from a late '91-'92 with tan plastic housing)
Fog light switch
Glove box cover
Switch to open trunk
Wiper/Cruise control with white text
Door lock switches, mirror controls with white text

Disregard the bezel on the fog switch as its for an 82-89 car.The switch itself is correct for 88-89 with white print and thats what will be included.Id do 130 shipped for everything

claytonjn

iTrader: (5)

Hey everyone, so I had to go to the ER a couple days ago. I've been pretty sick all week so I'm really sorry I've left everyone hanging. I'm getting on the computer for the first time in a while so I'm working on sorting through all my emails and everything. I promise I will get back to everyone ASAP.

RCAR7395

iTrader: (124)

Update: I just sold my last 91 92 hatch pull down but can most likely get you another one. I will defer this sale to my buddy MY82ROC as he has a great price on the whole deal as he posted. LMK if thats ok or if you want me to pull you one. I can not guarentee the posted price as I have not pulled it yet, or even located a good one.
Lmk
Thx
Ray

Hope you are now well !

kaitlin

iTrader: (5)

have dash emblem, switch , rear speaker panels in gray but have been cut for 6x9 speakers

ted gerlach

iTrader: (28)

still have the black panels, asking $80 for the pair,

claytonjn

iTrader: (5)

do you have pictures of the dash emblem and switch?

claytonjn

iTrader: (5)

do you have pictures?

my82roc

iTrader: (101)

I also have the fuse box cover

claytonjn

iTrader: (5)

Updated list

my82roc

iTrader: (101)

I forgot that I actually have the rear trunk latch from a 92 rs vert.Its different than the one I sent you as it doesnt have a motor

claytonjn

iTrader: (5)

The slam-down one? That's what I have installed now but I wanted the pull-down style so I could open it from my alarm remote. As far as I know getting a pull-down one is the only easy way to accomplish that in a 91.5-92 (without welding and fabricating).

kaitlin

iTrader: (5)

here is pic
mine is rs emblem
switches have little to no text
also have tire + inflator + lug wrench

claytonjn

iTrader: (5)

I'd like to find a z28 dash emblem, and I'm hoping to find switches with better text, but how much for the tire/inflator/wrench?

henryd3

iTrader: (128)

For defroster and fog, are you just looking for bezels, or switches also. I found some bezels. Also have an older shift plate in white, doesn't have the red strip like a 92 has though. Interested?

claytonjn

iTrader: (5)

Already got the switches, so now I just need bezels. The red strip you're talking about is the ting under the letter that says what gear you're in? If so, did any with white text have that?

henryd3

iTrader: (128)

I don't think so, but not positive. When I get back from the gym I'll send bezel and shift plate pics

claytonjn

iTrader: (5)

The picture of an 82-89 Shift plate at hawks shows the red indicator. Maybe it just faded...the one I have now is pretty faded.

henryd3

iTrader: (128)

Well, this one doesn't but I don't even remember which car it came from. The bezel piece for the defroster has the rectangular hole, but so far the only left side ones I've found are just blank solid ones. I take it you want the switch hole?

claytonjn

iTrader: (5)

yes, I am looking for the ones with the holes. I suppose I could just cut it myself though. I'm just worried it won't look as good because unless I'm mistaken the dash switches don't have a lip to cover the hole like the window and trunk switches.

henryd3

iTrader: (128)

That depends on your cutting skills, but it would need to be even. Right, well I've got the one. I'll keep looking.

claytonjn

iTrader: (5)

well I'm planning on cutting a hole for the trunk switch, so I guess I'll see how well that goes. Let me know if you find one for the other side too. I'd hate to have you go through the hassle of shipping just that one.

claytonjn

iTrader: (5)

List updated

dpmalibu

iTrader: (44)

I have black sun visors. I'll take $20 plus shipping for the pair. Here are some pics:

89Camaro89MI

iTrader: (2)

Hey, I'm parting out an 89 RS T Top and I've got a bunch of stuff on your list. In addition, I'm about 20 minutes from you in New Hudson, 48165

I've got a complete set of black plastic. Above average to great condition. If you want, I'll snap some pics, but I think it would be easier for you to just come and take a look.

If you'll come and get the whole set, I'll let it go for $175. Let me know if you're interested and we can set something up.

Here's my parting out thread. There's a few pics there.

https://www.thirdgen.org/forums/inte...89-camaro.html

claytonjn

iTrader: (5)

I'm definately interested, but I'm not sure how soon I'd be able to get out there...this weekend is probably going to be pretty busy for me.

What exactly is all the black plastic? As far as I can tell, the only plastic in the convertible that I need in black is the kick panels, door sills, and the part that continues up the door frame. Besides that all that's plastic and not black are the seatbelt things, the center console vents, and the plastic parts of the bucket seats.

89Camaro89MI

iTrader: (2)

Well, there's the whole sort of ring around the trunk area from the sides of the rear seats back. Now that you mention it, I havent really examined any of the convertibles up close. I those could all be different pieces than the ones I've got. One of these days I'll get some pics up of exactly what I'm sitting on and maybe you'll be able to tell if you need them or not.

Either way, I've got an entire 89 RS' worth of parts on hand, so if you need anything let me know.

claytonjn

iTrader: (5)

Yea in mine the trunk starts behind the rear seats. I've heard that in the late model verts they put molded carpet in the drives side and as the spare tire cover (which is what I have). I have the plastic in the middle that is over the latch. I would like to get the plastic pieces to replace the molded carpet, but I don't know if they will fit. The driver's side has a locking compartment, correct? If no one can verify that those plastic trunk pieces from a hatchback can fit in the vert I could always go over there and check for myself...

89Camaro89MI

iTrader: (2)

Yeah, I've got that compartment and all those pieces. PM me when you find some time and we'll try and work something out.

claytonjn

iTrader: (5)

Updated the list. If anyone knows about the compatibility of the trunk stuff let me know. Thanks!

claytonjn

iTrader: (5)

Updated list.

RCAR7395

iTrader: (124)

i have or can get most of that stuff, plz lmk what u still need.
THX
Ray

claytonjn

iTrader: (5)

Everything in the OP I still need:

• Cover for automatic trans gear changer (white text)
• Front seats - open to suggestions (thinking about getting racing seats or seats with built in seatbelts like from a BMW vert)
• Door mounted cupholders from firebird (black)
• Switch to open trunk (white text)
• Wiper/Cruise control (white text)
• Driver's side sun visor (black)
• Dash fog light switch bezel
• Hood release (white text)
• Black floor mats
• Black carpet
• Black carpeted lower center console
• Black door panels
• Black seat belts
• Trunk plastics - drivers side locking compartment & passenger side spare tire cover (does anyone know if these are interchangeable between coupe/t-tops/verts?)
• Locking storage shelf (preferably black probably without speakers because it's a 'vert) and everything else needed to make it work (Do I need a different latch cover? What about where it locks into the car? etc.)

ted gerlach

iTrader: (28)

pm sent

RCAR7395

iTrader: (124)

I have the shift plate, belts, grey pass side cup holder, can pull the console, and carpet, cruise lever sunday if payment is sent b4 i go to the yard. Not sure on the vert plastics but i think they are different.
Lmk
Ray

claytonjn

iTrader: (5)

Updated list.


Hey sorry, busy weekend with the holiday. Anything you could still get me? I'd like to see pictures if possible...

Thanks

RCAR7395

iTrader: (124)

whats the email again? will send u pics of what i got
shift plate $45
wiper switch white txt $20
white hood release cable $25
Visor $20
console $75 with top pad upper and lower
door panels $75 like my sig but some damage on back manual windows
belts, plastics and cargo shelf not sure if its same for verts,
trunk pop switch $10 no text on it
Lmk
Thx
Ray

claytonjn

iTrader: (5)

Email is JamMasterClay@gmail.com

I found a center console locally so I don't need that, and it came with a shifter plate in ALMOST perfect condition and a trunk switch so unless the shifter plate you have is perfect I don't need that or the switch either. Also, I probably won't be interested in the door panels if they are for manual windows, but send pictures of them anyways, I may want them. Belts and cargo shelf are the same in verts, but the plastics on the sides are not. Send pictures of what you have though and I'll try to figure out if it'll work.

So basically, send pics of:

claytonjn

iTrader: (5)

List updated

claytonjn

iTrader: (5)

Updated List

claytonjn

iTrader: (5)

Updated list

claytonjn

iTrader: (5)

List updated

claytonjn

iTrader: (5)

List Updated:

• Seats: I'm looking for black rear split-back seats, and tracks/switch/trim to make my Lear Seigler Conteur seats power. I'm also interested in getting a passenger side Conteur seat or power Conteur seats from an '86. Or any seats from other cars with built in seatbelts (like from BMW convertibles)
• Black door sills
• Convertible tonneau release switch (white text, not faded or smugged)
• Wiper/Cruise control (white text, not faded or smugged)
• Sun visor mirror
• Dash fog light switch bezel (from 90-92 dash)
• Black floor mats
• Black front carpet
• Black rear panels (from a 92 vert - should have lights and no cutouts for lap belts)
• 92 Camaro (Convertible) owners manual