[NC] Complete 10-rib Vortech pulley setup(crank, 2.75/2.95/3.33, flanged idler)
Thread Starter
Joined: Dec 2000
Posts: 1,953
Likes: 65
From: NC
Car: 1987 Iroc
Engine: 357 Single plane and a Ysi vortech
Transmission: T56
Axle/Gears: 3.50 9"
Complete 10-rib Vortech pulley setup(crank, 2.75/2.95/3.33, flanged idler)
I have several pullies that I won't be using because now I'm on a cogged setup... All are in GREAT shape and VERY low milage.
I'd like to sell all of them together for now.
2.75" 10-rib $50
2.95" 10-rib $50
3.33" 10-rib $50
4"(outer diameter) dual bearing idler pulley $60
Thanks
Chris
I'd like to sell all of them together for now.
2.75" 10-rib $50
2.95" 10-rib $50
3.33" 10-rib $50
4"(outer diameter) dual bearing idler pulley $60
Thanks
Chris
Last edited by NufNuffZ28; Dec 14, 2010 at 12:21 PM.
Thread Starter
Joined: Dec 2000
Posts: 1,953
Likes: 65
From: NC
Car: 1987 Iroc
Engine: 357 Single plane and a Ysi vortech
Transmission: T56
Axle/Gears: 3.50 9"
Re: Complete 10-rib Vortech pulley setup(crank, 2.75/2.95/3.33, flanged idler)
TTT...
This setup was on a 1987 Iroc. No belt slip issues at 650 rwhp an 18 lbs!
This setup was on a 1987 Iroc. No belt slip issues at 650 rwhp an 18 lbs!
Thread Starter
Joined: Dec 2000
Posts: 1,953
Likes: 65
From: NC
Car: 1987 Iroc
Engine: 357 Single plane and a Ysi vortech
Transmission: T56
Axle/Gears: 3.50 9"
Re: Complete 10-rib Vortech pulley setup(crank, 2.75/2.95/3.33, flanged idler)
Didn't wanna split right now, but if you make me an offer I guess I could sell the others to someone wanting some adjustibilty on their Vortech, but a different car.
Chris
Chris
Last edited by NufNuffZ28; Oct 26, 2010 at 09:49 AM.
Thread Starter
Joined: Dec 2000
Posts: 1,953
Likes: 65
From: NC
Car: 1987 Iroc
Engine: 357 Single plane and a Ysi vortech
Transmission: T56
Axle/Gears: 3.50 9"
Re: Complete 10-rib Vortech pulley setup(crank, 2.75/2.95/3.33, flanged idler)
up up up
Thread Starter
Joined: Dec 2000
Posts: 1,953
Likes: 65
From: NC
Car: 1987 Iroc
Engine: 357 Single plane and a Ysi vortech
Transmission: T56
Axle/Gears: 3.50 9"
Re: Complete 10-rib Vortech pulley setup(crank, 2.75/2.95/3.33, flanged idler)
TTT, taking offers!
Thread Starter
Joined: Dec 2000
Posts: 1,953
Likes: 65
From: NC
Car: 1987 Iroc
Engine: 357 Single plane and a Ysi vortech
Transmission: T56
Axle/Gears: 3.50 9"
Re: Complete 10-rib Vortech pulley setup(crank, 2.75/2.95/3.33, flanged idler)
Deal fell through. Will separate and take offers on all of them now
Trending Topics
Thread Starter
Joined: Dec 2000
Posts: 1,953
Likes: 65
From: NC
Car: 1987 Iroc
Engine: 357 Single plane and a Ysi vortech
Transmission: T56
Axle/Gears: 3.50 9"
Re: Complete 10-rib Vortech pulley setup(crank, 2.75/2.95/3.33, flanged idler)
Not sure, but will find out ASAP!
Thread Starter
Joined: Dec 2000
Posts: 1,953
Likes: 65
From: NC
Car: 1987 Iroc
Engine: 357 Single plane and a Ysi vortech
Transmission: T56
Axle/Gears: 3.50 9"
Re: Complete 10-rib Vortech pulley setup(crank, 2.75/2.95/3.33, flanged idler)
Just got off of the phone with Vortech. The inner diamter of the pulley is 20mm... Whats the novi?
Supreme Member
iTrader: (33)
Joined: Jul 2000
Posts: 5,945
Likes: 1
From: Boosted Land
Car: 92 Z28
Engine: Boosted LSX
Re: Complete 10-rib Vortech pulley setup(crank, 2.75/2.95/3.33, flanged idler)
I'll double check asap. i think its .875 which is like 22mm
Novi2000 is a large paxton.
Novi2000 is a large paxton.
Thread Starter
Joined: Dec 2000
Posts: 1,953
Likes: 65
From: NC
Car: 1987 Iroc
Engine: 357 Single plane and a Ysi vortech
Transmission: T56
Axle/Gears: 3.50 9"
Re: Complete 10-rib Vortech pulley setup(crank, 2.75/2.95/3.33, flanged idler)
Oh yeah, just meant what the diameter was, sorry.
Let me know!
Let me know!
Thread Starter
Joined: Dec 2000
Posts: 1,953
Likes: 65
From: NC
Car: 1987 Iroc
Engine: 357 Single plane and a Ysi vortech
Transmission: T56
Axle/Gears: 3.50 9"
Re: Complete 10-rib Vortech pulley setup(crank, 2.75/2.95/3.33, flanged idler)
Crank pulley sold... Will seperate
Thread Starter
Joined: Dec 2000
Posts: 1,953
Likes: 65
From: NC
Car: 1987 Iroc
Engine: 357 Single plane and a Ysi vortech
Transmission: T56
Axle/Gears: 3.50 9"
Re: Complete 10-rib Vortech pulley setup(crank, 2.75/2.95/3.33, flanged idler)
TTT
$75 a pulley and $90 for the idler...
$75 a pulley and $90 for the idler...
Thread Starter
Joined: Dec 2000
Posts: 1,953
Likes: 65
From: NC
Car: 1987 Iroc
Engine: 357 Single plane and a Ysi vortech
Transmission: T56
Axle/Gears: 3.50 9"
Re: Complete 10-rib Vortech pulley setup(crank, 2.75/2.95/3.33, flanged idler)
TOP!!!!!!!!
Thread Starter
Joined: Dec 2000
Posts: 1,953
Likes: 65
From: NC
Car: 1987 Iroc
Engine: 357 Single plane and a Ysi vortech
Transmission: T56
Axle/Gears: 3.50 9"
Re: Complete 10-rib Vortech pulley setup(crank, 2.75/2.95/3.33, flanged idler)
$60 a pulley...$80 on the idler
Thread Starter
Joined: Dec 2000
Posts: 1,953
Likes: 65
From: NC
Car: 1987 Iroc
Engine: 357 Single plane and a Ysi vortech
Transmission: T56
Axle/Gears: 3.50 9"
Re: Complete 10-rib Vortech pulley setup(crank, 2.75/2.95/3.33, flanged idler)
TTT, $50 a pulley firm.....
$60 on the idler
$60 on the idler
Thread Starter
Joined: Dec 2000
Posts: 1,953
Likes: 65
From: NC
Car: 1987 Iroc
Engine: 357 Single plane and a Ysi vortech
Transmission: T56
Axle/Gears: 3.50 9"
Re: Complete 10-rib Vortech pulley setup(crank, 2.75/2.95/3.33, flanged idler)
Up for lowered prices
Thread Starter
Joined: Dec 2000
Posts: 1,953
Likes: 65
From: NC
Car: 1987 Iroc
Engine: 357 Single plane and a Ysi vortech
Transmission: T56
Axle/Gears: 3.50 9"
Re: Complete 10-rib Vortech pulley setup(crank, 2.75/2.95/3.33, flanged idler)
up again.....
Thread Starter
Joined: Dec 2000
Posts: 1,953
Likes: 65
From: NC
Car: 1987 Iroc
Engine: 357 Single plane and a Ysi vortech
Transmission: T56
Axle/Gears: 3.50 9"
Re: Complete 10-rib Vortech pulley setup(crank, 2.75/2.95/3.33, flanged idler)
You know where we are going
Thread Starter
Joined: Dec 2000
Posts: 1,953
Likes: 65
From: NC
Car: 1987 Iroc
Engine: 357 Single plane and a Ysi vortech
Transmission: T56
Axle/Gears: 3.50 9"
Re: Complete 10-rib Vortech pulley setup(crank, 2.75/2.95/3.33, flanged idler)
THE TOP.... that's where!
Thread Starter
Joined: Dec 2000
Posts: 1,953
Likes: 65
From: NC
Car: 1987 Iroc
Engine: 357 Single plane and a Ysi vortech
Transmission: T56
Axle/Gears: 3.50 9"
Re: Complete 10-rib Vortech pulley setup(crank, 2.75/2.95/3.33, flanged idler)
$150 for the remaining 4,PLUS shipping!
Thread Starter
Joined: Dec 2000
Posts: 1,953
Likes: 65
From: NC
Car: 1987 Iroc
Engine: 357 Single plane and a Ysi vortech
Transmission: T56
Axle/Gears: 3.50 9"
Re: Complete 10-rib Vortech pulley setup(crank, 2.75/2.95/3.33, flanged idler)
Moving and I don't want to take these with me... TOP!!!
will trade towards Edelbrock base!
will trade towards Edelbrock base!
Thread Starter
Joined: Dec 2000
Posts: 1,953
Likes: 65
From: NC
Car: 1987 Iroc
Engine: 357 Single plane and a Ysi vortech
Transmission: T56
Axle/Gears: 3.50 9"
Re: Complete 10-rib Vortech pulley setup(crank, 2.75/2.95/3.33, flanged idler)
2.95 is sold....
Last edited by NufNuffZ28; Jan 21, 2011 at 07:13 PM.
Thread Starter
Joined: Dec 2000
Posts: 1,953
Likes: 65
From: NC
Car: 1987 Iroc
Engine: 357 Single plane and a Ysi vortech
Transmission: T56
Axle/Gears: 3.50 9"
Re: Complete 10-rib Vortech pulley setup(crank, 2.75/2.95/3.33, flanged idler)
Up....$100 for the remaining 3....
Thread Starter
Joined: Dec 2000
Posts: 1,953
Likes: 65
From: NC
Car: 1987 Iroc
Engine: 357 Single plane and a Ysi vortech
Transmission: T56
Axle/Gears: 3.50 9"
Re: Complete 10-rib Vortech pulley setup(crank, 2.75/2.95/3.33, flanged idler)
Up again!
Thread Starter
Joined: Dec 2000
Posts: 1,953
Likes: 65
From: NC
Car: 1987 Iroc
Engine: 357 Single plane and a Ysi vortech
Transmission: T56
Axle/Gears: 3.50 9"
Re: Complete 10-rib Vortech pulley setup(crank, 2.75/2.95/3.33, flanged idler)
Not sure, but I'll measure it asap...
Thread Starter
Joined: Dec 2000
Posts: 1,953
Likes: 65
From: NC
Car: 1987 Iroc
Engine: 357 Single plane and a Ysi vortech
Transmission: T56
Axle/Gears: 3.50 9"
Re: Complete 10-rib Vortech pulley setup(crank, 2.75/2.95/3.33, flanged idler)
I checked it today. It is 17mm...
Thread Starter
Joined: Dec 2000
Posts: 1,953
Likes: 65
From: NC
Car: 1987 Iroc
Engine: 357 Single plane and a Ysi vortech
Transmission: T56
Axle/Gears: 3.50 9"
Re: Complete 10-rib Vortech pulley setup(crank, 2.75/2.95/3.33, flanged idler)
Idler is sold!!!
$100 shipped on 2.75 and 3.33 together
$100 shipped on 2.75 and 3.33 together
Thread Starter
Joined: Dec 2000
Posts: 1,953
Likes: 65
From: NC
Car: 1987 Iroc
Engine: 357 Single plane and a Ysi vortech
Transmission: T56
Axle/Gears: 3.50 9"
Re: Complete 10-rib Vortech pulley setup(crank, 2.75/2.95/3.33, flanged idler)
$80.... for both!
Thread Starter
Joined: Dec 2000
Posts: 1,953
Likes: 65
From: NC
Car: 1987 Iroc
Engine: 357 Single plane and a Ysi vortech
Transmission: T56
Axle/Gears: 3.50 9"
Re: Complete 10-rib Vortech pulley setup(crank, 2.75/2.95/3.33, flanged idler)
Offers?
2 left
2 left
Senior Member
iTrader: (3)
Joined: Jul 1999
Posts: 844
Likes: 0
From: Long Island, NY
Car: 1987 GTA
Engine: 645hp/656 ft lb Blown 383
Transmission: 700-R4 3,000 stall
Axle/Gears: 3.55 moser 12-bolt
Re: Complete 10-rib Vortech pulley setup(crank, 2.75/2.95/3.33, flanged idler)
what cogs are you running? where did you get crank pulley?
Thread Starter
Joined: Dec 2000
Posts: 1,953
Likes: 65
From: NC
Car: 1987 Iroc
Engine: 357 Single plane and a Ysi vortech
Transmission: T56
Axle/Gears: 3.50 9"
Re: Complete 10-rib Vortech pulley setup(crank, 2.75/2.95/3.33, flanged idler)
ASP fabricated custom setup(50mm) ... Search my name and you'll see my build thread
Senior Member
iTrader: (3)
Joined: Jul 1999
Posts: 844
Likes: 0
From: Long Island, NY
Car: 1987 GTA
Engine: 645hp/656 ft lb Blown 383
Transmission: 700-R4 3,000 stall
Axle/Gears: 3.55 moser 12-bolt
Re: Complete 10-rib Vortech pulley setup(crank, 2.75/2.95/3.33, flanged idler)
got any of these pulleys around? thanks
Thread
Thread Starter
Forum
Replies
Last Post
Terrell351
Engine/Drivetrain/Suspension Parts for Sale
5
Jun 13, 2021 01:13 PM
ambainb
Camaros for Sale
11
Apr 25, 2016 09:21 PM
evilstuie
Engine/Drivetrain/Suspension Wanted
15
Apr 14, 2016 08:52 PM
